Page 891 - C.C.Marine Parts & Accessories Catalogue
P. 891

TALULAH BALLAST PUMPS
Ballast Pumps for Wake Sport Boats. • Built-in thermal overload protection w/ automatic reset • Ideal for tank systems with overfill/empty monitoring
BALLAST PUMP
TALULAH HIGH FLOW
30 GPM
• 12V - 13.6V for full capacity • Built in Thermal Overheat Protection • Amp Draw @ Pumping: 25A • Amp Draw @ Reversal: Up to 45A • Fuse: 50A • Connection: External 1-1/2" NPTF • Minimum Hose Size: 1-1/2" (ø38 mm) • Degree of Protection: IP 54 • Standards: SAEJ1171 (motor and solenoids
approved for use in engine compartment) Electrical safety of ISO8846 (protection against ignition of flammable gases)
• Replacement Run Dry Impeller, EZ reverse design (CC # 671-09849P-2) Mfr. No. (09-849P-2)
ORDER NO. 671-24939-18
Mfr. No. 10-24939-18
BALLAST PUMP
TALULAH
13.5 GPM
• 12V • Built in Thermal Overheat Protection • Amp Draw @ Pumping: 14A • Amp Draw @ Reversal: Up to 18A • Fuse: 25A • Connection: External 1" standard hose
Internal 1/2" NPT (female) • Minimum Hose Size: 1" (ø25.4 mm)
• Degree of Protection: IP 54, Electrical enclosure protected from water intrusion from any direction
• Standards: SAEJ1171 (motor and solenoids approved for use in engine compartment) Electrical safety of ISO8846 (protection against ignition of flammable gases)
• Replacement Run Dry Impeller, EZ reverse design (CC # 671-09824P-2) Mfr. No. (09-824P-2)
ORDER NO. 671-24690-18
Mfr. No. 10-24690-18
POLARITY REVERSING SWITCH KIT
• Accessory for Ultra Ballast Pump (F4B-11) ORDER NO. 094-71960	Mfr. No. 09-47196
For more information see; www.spxflow.com/johnson-pump-marine
WAKEBOARD AND SKI BOAT BALLAST PUMPS
Designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them.
BALLAST PUPPY - 9 GPM
• Adds approx 80 lbs. of ballast water per minute • Reversible pump to both fill & empty ballast tanks • Self-priming to 3 ft. • Exclusive (Patent pending) Run-dry protection shuts off
pump before impeller is damaged • Complies with USCG 183.410 & ISO 8846 MARINE
(Ignition Protection)
• Replacement Impeller ORDER NO. 06303-0007-P (Green) Fittings:
Ports -	1/2" (13mm) NPT internal thread, 1" (25mm) External Hose Barb
Size:	7-1/8" (18cm)L 4-3/4" (12cm)W
3-5/8" (9 cm)H Weight: 6 Ibs. (2.7 kg)
ORDER NO. 18220-1127 Reversing Switch Included ORDER NO. 06303-0007-P Replacement Impeller
(Ballast Puppy)
BALLAST KING BRONZE DC FLEXIBLE IMPELLER PUMP - 15 GPM - 12 VDC • Adds approx 125 lbs. of ballast water per minute • Reversible pump to both fill & empty ballast tanks
• Self-priming to 4 ft. • Exclusive (Patent pending) Run-dry protection shuts off
pump before impeller is damaged • Complies with USCG 183.410 & ISO 8846 MARINE
(Ignition Protection)
• Replacement Impeller ORDER NO. 23095-0007-P (Red) OR • Replacement Impeller ORDER NO. 06303-0007-P (Green)
Fittings:
Ports -	1/2" (13mm) NPT internal thread, 1" (25mm) External Hose Barb
Size:	9.3" (18cm)L 4-3/4" (12cm)W
3-5/8" (9 cm)H Weight: 6.6 Ibs. (3 kg)
ORDER NO. 22610-9007 ORDER NO. 22610-9427 ORDER NO. 22610-9507
Reversing Switch NOT INCLUDED Deutsch Connector, NO REVERSING SWITCH Reversing Switch INCLUDED
For more information see: www.xylem.com
WAKEBOARD & SKI BOAT BALLAST PUMPS
857


































































































   889   890   891   892   893