Page 903 - C.C.Marine Parts & Accessories Catalogue

AUTOMATIC - NEXT GENERATION ELECTRONIC SENSING S SERIES BILGE PUMPS
No Float Switch Needed! Works on the principle of Impeller Resistance! The pump will turn on every 2-1/2 minutes for about one second to sense the water. If water is present, the pump will sense resistance and continue to run until all water is removed. After, the pump will resume checking for water every 2-1.2 minutes. Water is kept in check between 1/8" and 3/8"!!
• Higher Flow • Submersible and ignition protected • High effeciency, low amp motor • Stainless steel shaft • Includes backflow preventer • Includes 3/4" ports • Check valve included with hidden air vent to prevent airlocking • True electromagnetic suppression (EMC) • Built-in thermal cell that protects the pump
and the vessel when things get too hot ORDER NO. Mfr. No. GPH/LPH
272-25000-SA 25SA 500/1890
272-20000-SA 20SA 800/3028
272-27000-SA 27SA 1100/4164
Volts
12 DC
12 DC
12 DC
Amps@ 12V
2.1 (12V)
1.6 (12V)
3.4 (12V)
Check Hose Dia. ID
Amps@ Fittings 13.6V Valve
2.4 (13.6V) Yes
1.8 (13.6V) Yes
4.3 (13.6V) Yes
Yes 3/4" (19mm)
Yes 3/4" (19mm)
Yes 1" (25mm) & 1-1/8" (29mm)
NON - AUTOMATIC - NEXT GENERATION OF BILGE PUMPS
Best Design with Higher Flow & BackFlow Prevention! Use with a Panel Switch or Rule Float Switch Rule has re-engineered inside and out the bilge pump with the idea that a 500 gph pump should produce maximum open flow at 12 volts (more typical of on-board voltage supply) rather than the 13.6 volts of a vessel’s alternator.
• Submersible and ignition protected • High effeciency, low amp motor • Stainless steel shaft • Higher flow
• Includes backflow preventer • Includes ports and check valves
ORDER NO.
272-24000-DA
272-25000-DA
272-20000-DA
272-27000-DA
Mfr. No.
24DA
25DA
20DA
27DA
GPH/LPH
360/1363
500/1890
800/3028
1100/4164
Volts
12 DC
12 DC
12 DC
12 DC
Amps@ Amps@ 12V 13.6V
2.1 (12V) 2.4 (13.6V)
1.6 (12V) 1.8 (13.6V)
3.4 (12V) 4.3 (13.6V)
3.7 (13.6V) 4.7 (13.6V)
Fittings Check Valve
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Hose Dia. ID
3/4" (19mm)
3/4" (19mm)
3/4" (19mm)
1" (25mm) & 1-1/8" (29mm)
RULE-MATE FULLY AUTOMATED BILGE PUMPS - VDC
• All-in-one pump and switch • Saves installation time and space in the bilge • Extra long-life heavy duty motor • Environmentally safe, non-contact, mercury-free float switch • Improved port sizing to a threaded discharge • Improved switching with a protective mode
ORDER NO.
Mfr. No.
Description
Volts
Threaded Discharge
Dimensions
Amps
272-15000A
RM1500A
1500 GPH, (6819 lph)
12 V
1" NPSM port
6" H x 7-1/4" W
4.8
272-20000A
RM2000A
2000 GPH, (7568 lph)
12 V
1" NPSM port
6" H x 7-1/4" W
8.4
Note: Threaded discharge port accepts the included 1" and 1-1/8" hose barb ports as well as the optional 1" and 1-1/8" 90˚ elbows sold separately.
For more information see: www.xylem.com
BILGE PUMPS
869