Page 925 - C.C.Marine Parts & Accessories Catalogue
P. 925
PAR 36800-SERIES
Two well established and service-proven pumps for larger boats. Both designed specifically to supply a reliable, smooth and steady flow of water for up to four fixtures.
Features include: Run dry capability; belt drive and flexible mounts for low noise; built-in check valve protection against city water pressure (automatic switch maintains 39 psi. pressure); pulsation dampeners to absorb water hammer; battery conserving low amperage motors; and ports sized to take 1/2"-5/8" ID hose.
36800-Series
Can be used in salt water systems for galley rinse water and deck and anchor washdown.
OPEN FLOW ORDER NO. GPM LPM
36800-1000 3.3 12.5
PAR 36950-SERIES
AMPS/ FUSE SIZE
6/8
DIMENSIONS-in (mm)
VOLTS
12 Vdc
HEIGHT
8-3/8(213)
WIDTH
6-1/2 (165)
LENGTH
9-7/8 (251)
36950-Series
A popular pump for boats with two or three fixtures. A dependable, low maintenance pump able to run dry extended periods. Smooth belt drive and flexible mounts aid noise reduction. Pump protected against city water pressure by built-in check valve. Pulsation dampeners absorb water hammer and give smooth flow to fixtures. Low amperage motors conserve battery power. Ports fit 1/2" - 5/8" hose.
This pump can be used in salt water systems for deck and anchor washdown, and galley rinse water.
OPEN FLOW
ORDER NO. GPM LPM
36950-2000 3.0 11.4
AMPS/
FUSE SIZE
6/8
DIMENSIONS-in (mm)
VOLTS
12 Vdc
HEIGHT WIDTH
8-1/2 (216) 6-1/2 (220)
LENGTH
7-1/2 (191)
ULTRA MAX WATER PRESSURE SET
A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a PAR-Max pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a rubber mounted board.
Serves 3 or more 1/2" (13mm) outlets. • Flow of 3.5 gpm (13.2 lpm). • Self-priming up to 10ft (3m). • Can be installed vertically or horizontally. • Quadruple Diaphragms for smooth and quiet operation. • Thermal overload protection automatically stops motor should
it overheat due to overload, with auto re-start feature. • Diaphragm design allows extended dry running. • Pressure switch cut-in 20 psi (1.4 bar), cut-out 40 psi (2.8 bar)
(59451-1012). • Maintenance free potable water quality accumulator tank. • Complies with USCG 183.410
and ISO 8846 MARINE (Ignition Protection).
Fitting: Connections for 1/2" (13mm) ID hose or 1/2" (15mm) Qest fittings. Size: 15-1/2" long x 15-3/4" wide x 5-1/2" high (39cm x 40cm x 14cm). ORDER NO. Description
59451-1012 12 Volt DC model, fuse 10 amp, high pressure version
PUMPS WITH AC MOTORS CAN SPARK. EXPLOSION AND DEATH CAN OCCUR. DO NOT USE WHERE FLAMMABLE VAPORS ARE PRESENT. All DC voltage pumps shown above meet applicable ignition protection sections of the U.S. Coast Guard Electrical Regulations (Title 33, Chapter 1, Part 183, Subpart 1).
For more information see: www.xylem.com
WATER PRESSURE PUMPS
891