Page 933 - 2025 Parts & Accessories Catalogue

PREP & CONDITIONING/PAINTS
A-788 SPLASH ZONE
Two-Part Epoxy Repair Compound
Extremely hard, abrasion and impact resistant, two-part epoxy patching compound. It applies like putty to seal, fill, patch or rebuild aluminum, wood, concrete, fiberglass, & steel. It can be applied in or out of water to repair boat hulls, buoys, seawalls, docks, bridge abutments, & more. Splash Zone provides excellent protection against corrosion of metals and erosion and deterioration of concrete or wood. Splash Zone’s rock-hard surface can be drilled, tapped, or machined. Recommended for patching and repairing damaged underwater surfaces. Not for use in potable water.
ORDER NO. Mfr. No. Kit Size
50788-5001 A-788-SG2 2-Gallon Kit
PROP COAT BARNACLE BARRIER Zinc Protection for all Underwater Metals. Can be used Above and Below the Waterline. • Underwater metal protection including aluminum,
steel, stainless steel, cast iron, copper, bronze,
galvanized steel, and lead • Excellent adhesion to clean metals • Contains the highest concentration of pure zinc • Easy to use fast dry formula
ORDER NO. Mfr. No. Size
51792-5000-1 1792 20 oz. Aerosol
WATER BASED ANTI-FOULING MARINE PAINTS FOR FIBERGLASS & WOODEN BOATS • Enviro-Friendly Product • Ablative action repels barnacles & other growth
• Fast drying • Water based paint rolls on easily • Great value and outstanding results • Soap & water clean-up • Exceeds V.O.C. standards • Controlled leach out • Non-toxic fumes • Also great for use on inflatable boats without the use of primer! • Plastic containers increase shelf life • Not for aluminum boats • U.S. EPA approved
180 WASH & DEWAXER
For use on bare fiberglass & aluminum surfaces
• Marine grade • Formulated to strip mold release agent from fiberglass surface • Removes grease and wax from gelcoat and aluminum • Smooths surface for paint application
EZ-POXY PERFORMANCE ENHANCER Topside Finish Performance Enhancing Additive • Provides exceptional durability, hardness, gloss, gloss retention,
scratch resistance, and longevity of Pettit solvent based topside
finishes • Provides durability and gloss of linear polyurethanes with the ease
of use of enamels and one-part polyurethanes • Increases flow out of brush strokes and roller stipple,
providing a mirror-like high gloss finish
ORDER NO.
53021-5000
Mfr. No.
3021
Size
236 ml (8 oz.)
For more information see: www.pettitpaint.com
AQUAGARD® BOTTOM PAINT
ORDER NO.
353-10001
353-10101
353-10002
353-10102
353-10003
353-10103
353-10007
353-10107
Mfr. No.
10001
10101
10002
10102
10003
10103
10007
10107
Description
Black (Qt)
Black (Ga)
Red (Qt)
Red (Ga)
Blue (Qt)
Blue (Ga)
Shark White (Qt)
Shark White (Ga)
ORDER NO.
353-30000
353-30100
Mfr. No.
30000
30100
Size
Quart
Gallon
For more information see: www.flexdel.com
901