Page 1080 - 2019-2020 CCMarine Catalogue
P. 1080

TRIM TAB REPLACEMENT PARTS & ACCESSORIES
GENUINE LENCO REPLACEMENT PARTS & ACCESSORIES
STANDARD ACTUATOR 101 SERIES - 12 VOLT Standard replacement actuator for most 12-V Lenco trim tabs. 2-1/4" Stroke (5.715 cm) with/6' Cable & Deutsch Connector.
The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2-1/4" stroke - Overall length tip to tip = 12-1/2". Includes 5/16" mounting hardware with 6' cable.
ORDER NO.	Mfr. No.
288-15054 15054-001
STANDARD ACTUATOR 101 XDS SERIES (SHORT) 12 VOLT 2-1/4" Stroke (5.715 cm) with/6' Cable & Deutsch Connector.
The 101 XDS Actuator is used in OEM Specific kits & limited space. Applications: It is the shortest actuator Lenco manufacturers. 2-1/4" stroke - Overall length tip to tip = 10-7/8". Includes 5/16" mounting hardware with 6' cable.
ORDER NO.	Mfr. No.
288-15057 15057-001
LIMITED QUANTITY - Once Stock Depletes, Stock will Supercede to the NEW Standard Duty (SD) Actuators
The entire Lenco actuator is fully submersible and maintenance-free. Lenco electric actuators replace Bennett 4-ring actuators. All Lenco products are CE certified.
STANDARD DUTY (SD) ACTUATOR
Replaces 101 & 102 Series Actuators The NEW SD will work with all Lenco switches, including Auto Glide,
as well as in any application where a 101/102 is currently used.
•NEW actuator lower end design and tooling provide increased side-load capabilities and water resistance
•New nylon material has over three times the glass fill content •Tighter tolerances in mechanical seal areas •Improved threaded retainer material (13% to 43% glass filled) •Three times improved side-load capability
•Includes 5/16" mounting hardware with 6' cable. •5 Year limited warranty NEW FEATURES:
1. Molded threaded retainer screws into lower housing compressing the seals and locking into position 2. Two O-rings used to seal the lower housing 3. Two dynamic seal spacers with improved circularity and increased material strength
123
DOUBLE ROCKER SWITCH KIT - 122 FOR STANDARD TRIM TABS Without built-in retractor feature for single actuator systems •For standard trim tabs, standard &
HD Performance Tabs
( Single Actuator Versions) • 12 Volt •With 36" power pigtail •Installation hardware included
ORDER NO.	Mfr. No.
288-10220 10222-211D
NEW Standard Duty SD Actuator 2-1/4" stroke - Overall length tip to tip = 12-1/2". Includes 5/16" mounting hardware with 6' cable. ORDER NO.	Mfr. No.
288-15054-1 15054-001
NEW Standard 101 XDS Series Actuator Applications: It is the shortest actuator Lenco manufacturers. 2-1/4" stroke - Overall length tip to tip = 10-7/8". Includes 5/16" mounting hardware with 6' cable.
ORDER NO.	Mfr. No.
288-15057-1 15057-001
RETROFIT KIT FOR BENNETT TRIM TABS Upgrade your boat with trouble-free, high performance Lenco electric actuators.
Easy installation: • Use existing Bennett trim planes,
brackets and standard rocker switch • Use all existing mounting holes Kit contains: 2 electric actuators, 2 upper mounting brackets, switch wiring kit & all mounting hardware
ORDER NO.	Mfr. No.
288-15064-1 15064-001 For more information see: www.lencomarine.com
1048


































































































   1078   1079   1080   1081   1082