Page 1202 - 2019-2020 CCMarine Catalogue
P. 1202

FUEL SENDERS
615-35722-10
615-35750-10
801-35794-10
801-35769-10
ELECTRIC FUEL SENDING UNIT - SWINGARM
• Connects to a dash mounted gauge without a conversion capsule. • Consumer can measure their tank depth and make the swingarm the correct length • Internal measurement components will not rust or corrode! • Calibrated to 33-240 Ohms - An industry standard • 100% inspected during manufacturing to ensure the highest quality • Swingarm float rotates easily in 90o increments for tank wall or baffle clearance • Complete with 5 hole gasket and mounting screws
ORDER NO.
615-35722-10
801-35725-10
615-35727-10
Mfr. No.
035722-10
035725-10
035727-10
Description	615-35727-10
Electric Sending Unit for Tanks with a depth of 6" to 12"
Universal Electric Sending Unit 4" to 27" Kit 33 to 240 Ohms
Dash Mounted Electric Fuel Gauge 33 to 240 Ohms
MECHANICAL SENDING UNIT
• All mechanical senders are calibrated to 33 to 240 Ohms - an industry standard. Compatible with competitive units
• Mechanical direct sight gauge comes complete on unit • Gasket and screws(5) are included • An optional conversion capsule (615-35760-10) is available for electrical dash-mounted gauge
readouts. Conversion is simple by removal of two screws and replacement of capsule
ORDER NO.
615-35750-10
615-35753-10
Mfr. No.
035750-10
035753-10
Description
Mechanical Sender Fits 7-1/2" Deep Tank
Mechanical Sender Fits 11-3/4" Deep Tank
REED ARRAY SENDING UNIT
• Available with or without dash-mounted gauge - designed for top-mount in aluminum, plastic or stainless steel fuel tanks
• Limited lifetime warranty • Material provides superior corrosion protection,
both inside and outside the tank. Black wire is ground. • For tank depths 6" to 24" • Pre-bent 90˚ float arm
ORDER NO.	Mfr. No.
801-35791-10	035791-10
801-35794-10	035794-10
REED SWITCH
Description
Reed Array
Reed Array w/Gauge
Dramatically reduce "slosh fluctuations" which are inherent with swingarm units. Designed for all types of marine vessels. Sender top-mounts in aluminum, plastic or stainless steel fuel tanks. Reed Switch Materials: Stainless Steel with nitrile rubber float, provide superior corrosion protection, both inside and outside the tank. Black wire is ground. • Suitable for gasoline, ethanol, diesel,
bio-diesel and non-potable water • Fits tanks with depth ranging from 6" to 60" Note: When purchasing sender length is 1" shorter than tank depth.
ORDER NO.
801-35773-10
801-35774-10
801-35769-10
801-35761-10
801-35762-10
801-35764-10
801-35765-10
801-35767-10
801-35768-10
801-35770-10
Mfr. No.
035773-10
035774-10
035769-10
035761-10
035762-10
035764-10
035765-10
035767-10
035768-10
035770-10
Tank Depth
6"	(142 mm)
7"	(191 mm)
8"	(203 mm)
9"	(229 mm)
11"	(254 mm)
13"	(305 mm)
15"	(356 mm)
18-1/2"	(445 mm)
21"	(553 mm)
23"	(584 mm)
For more information see: www.moellermarine.com For more information see: www.moellermarine.com
1170


































































































   1200   1201   1202   1203   1204