Page 1242 - 2019-2020 CCMarine Catalogue
P. 1242

TRIM/JACK PLATE ACCESSORIES
SETBACK SPACER
Setback spacer must be used with 1989 and newer Merc./Mariner when mounted on EJ-50 • 1/2" Thick
TRIM SWITCH
Trim switch mounts onto steering wheel allowing driver to keep both hands on steering wheel.
ORDER NO. 098-00300
Mfr. No. SP-300
MOUNTING BOLT KITS
BOLT KIT FOR JACKING PLATES
• For Mounting Outboard to Plate Kit Contains:
4 each 1/2" – 13 x 3" long bolts – stainless steel 4 each 1/2" – 13 lock nuts – brass with nylon insert 8 each 1/2" – flat washers – stainless steel
ORDER NO. 205-40001
ORDER NO. 098-00600
098-00600
Mfr. No. EJ-60
For engine jack. Stainless steel. Packaged for your convenience. Saves time and ensures the correct bolts and nuts.
Kit Contains:
4 each 1/2" N.C. x 3-1/2" Bolts 4 each 1/2" N.C. x 2" Bolts 8 each 1/2" N.C. x Nuts
ORDER NO. 098-00023
Mfr. No. BK-1-DP
Pcs/Pack
Mfr. No. EJ-23
For more information see: www.thmarine.com
BOLT KITS FOR JACK PLATES
ORDER NO.
756-40001
756-00010
756-00020
756-00023
756-00030
Mfr. No.
KT-011
KT-010
KT-020
KT-012
KT-030
Description
Jack Plate Bolt Kit
Jack Plate Motor Mount Kit
Jack Plate Transom Mount Kit
Bolt & Nut Kit
Motor Mount Kit, Long
KT-011
KT-012
KT-010, KT-020, KT030
Packaged in Brown Box
For more information see: handimanmarine.com
STEERING TRIM CONTROL UNIT
This Steering Trim Control Unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The Steering Trim Control Unit mounts easily to steering wheel spokes to place engine trim control at your fingertips for maximum safety and ease of operation. The weatherproof, rubber-booted, push-button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel.
ORDER NO. 205-11001
Mfr. No. ST-1-DP Steering Trim Control Unit
TRANSOM TRIM CONTROL
This transom Trim Control provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jackplates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.
ORDER NO. 205-20001
Mfr. No. TTC-1-DP Transom Trim Control
For more information see: www.thmarine.com
1210


































































































   1240   1241   1242   1243   1244