Page 1377 - 2019-2020 CCMarine Catalogue
P. 1377

ACCESS DOORS/SUPPORT CAPS
END CAPS & BOTTOM CAPS	“Top Cap” End Caps and Bottom Caps are designed to fit on the End Cap Pad top and bottom of boards that are commonly used as support poles under shrink wrap covers. The Caps have slits every 90˚ for the woven cord strapping to slide into and when the cover is shrunk, the sections flex downward forming a protective pad on top to eliminate pole poke-through. Bottom Caps have non-skid disks attached for added stability.
Non - Skid "Bottom Caps"
ORDER NO. 231-23116
Mfr. No. DS-BCAP
ORDER NO. 110-20004
Mfr. No. DS-CAP
SUPER CAP
The Super Cap is designed to transfer the weight of snow, ice and rain from the top of 2" x 4" support poles used under shrink wrap storage covers. Rests on the woven cord strapping which runs both lengthwise and crosswise on boats thereby helping to minimize support poles from poking through the shrink wrap storage covers.
Super Caps can easily be attached to wooden uprights with either a nail or staples.
• Domed shaped • Dimensions: (20" x 20" x 6")
RHINO CAP
ORDER NO. 231-30004
Mfr. No. DS-SUPERCAP
• The Rhino Cap is designed to keep support poles from poking through shrink wrap on storage covers • Improves upon our tested and proven End Cap design by adding additional support and rigidity • 100% stronger than existing End Cap design with 20% more surface area
ORDER NO.
424-91110
Mfr. No.
491110-1
ORDER NO. 231-11453
Mfr. No. DS-RCAP
BOAT HOOK MOORING COVER SUPPORT CROWN Injected Molded Nylon
A	B	C	D	E
7/8" (Tapered)	2"	6-1/2"	1"	1/2"
An injection–molded nylon crown that fits the tip of an adjustable boat hook or any universal/Acme thread that is used to support a mooring cover or canvas. The unique design has strap or line attachment details allowing the ability to secure the support crown in the correct location eliminating problems caused by water pooling pressures from rain, sleet or snow. Combine any of Sea-Dogs Boat hook with the support crown # 491110-1 and mooring cover support crown straps # 491115-1 for the perfect solution to nature’s pooling pressures.
ACCESS DOORS with ZIPPERS
Zipper Access Doors are taped on the finished cover to allow access into a shrink wrapped object without compromising the durability of the cover. Have a continuous heavy duty zipper sewn into a “U” shape. Use a film knife to cut the inside of the opening for access into the shrink wrapped object.
Dimensions of the plastic perimeter, not the size of the opening.
White	Blue
Access Doors w/ 2 Zippers
Note: 2 zippers allow for easier access
• Reusable • Waterproof • Easily installed, taped on
• Does not shrink, no heat necessary • Double pull zippers • Open access doors from exterior or interior of vessel or object
Access Doors w/ 1 Zipper
ORDER NO.	Colour
Size: 30"W x 36"L - 1 Zipper
ORDER NO.	Colour
Size: 36"W x 72"L - 2 Zipper 110-00782-1 Clear,
110-00781-1 Blue,
110-00780-1 White,
Size: 36"W x 48"L - 2 Zipper 110-36482-2 Clear,
110-36489-4 White,
110-00777-2
110-00778-2
110-00779-2
Clear,
Blue,
White,
(2 per pack)
(2 per pack)
(2 per pack)
(2 per pack)
(2 per pack)
(2 per pack)
(1 per pack)
(1 per pack)
(1 per pack)
(2 per pack)
(2 per pack)
Size: 36"W x 48"L - 1 Zipper
110-36481-2
110-36488-2
110-36489-2
Clear,
Blue,
White,
2 Zipper
DR. SHRINK “WRAP IT UP” CD
A professionally produced step-by-step guide to shrinkwrapping a boat and machinery. It logically and safely guides the wrapper through installation of a support structure, putting on the wrap, heating, venting and repairing holes. Note: This Training CD is included with Heat Tool Kit DS-789/231-07890. (See Page 1346) ORDER NO. 231-00150	Mfr. No. DS-00015CD
For more information see: www.dr-shrink.com
1345


































































































   1375   1376   1377   1378   1379