Page 373 - 2019-2020 CCMarine Catalogue
P. 373

VESSEL SYSTEMS MONITOR
VESSEL SYSTEMS MONITOR - VSM422
738-18010 Clamshell
DC SYSTEMS MONITOR
Voltage (up to 3 batteries), amperage, battery state of charge - amp hours remaining, time remaining, % charge, battery temperature, cycle count. AC SYSTEMS MONITOR Voltage, amperage, watts, frequency
4 METERS IN ONE
Features:
TANK MONITOR (up to 3 tanks) Gasoline, diesel, water, waste BILGE MONITOR Bilge pump - Active, cycle count, duration/hr, cycle/24 hr
1810
• DC Systems, AC Systems, Tank and Bilge monitoring • 12 or 24 Volts • Display three intuitive modes - multi-line text to monitor all
systems at a glance, icons for simple visual status, or large
font that can be read from a distance • Mounting - versatile case design offers three mounting
options • Programmable legends and adjustable alarm functions can
be customized to fit every boat • 4.50"W x 3.00"H x 2.00"D
Regulatory:
• Marked for E60945 electro-magnetic interference • IP67-VSM 422 Surface Mount Gasket creates a waterproof
seal on unit face - temporary immersion for 30 minutes
Specifications: DC Nominal Syatem Voltage Operating Voltage Minimum Current Draw
Voltage Accuracy Current Range Current Accuracy
AC
Nominal Syatem Voltage
Operating Voltage Voltage Accuracy (RMS) Current Range Current Accuracy (RMS) Frequency
12 or 24V 8.5-33.0V 35mA @ 12V, backlight off 18.8mA @ 24V, backlight off +/-0.5% 0-500A +/-1.0%
120V @ 60Hz, North America 230V @ 50Hz, Typical of Europe 0-300V +/-0.5%
0-150A +/-2.0% 40-90Hz
ORDER NO.
738-18000
738-18010
Mfr. No.
1800
1801
Description
Vessel Systems Monitor, Boxed
Vessel Systems Monitor, Clamshell
1811
VSM 422 BATTERY TEMPERATURE SENSOR • For use with the Vessel Systems Monitor VSM 422 • Corrosion resistant • Fully Sealed • Compact • Resistance 10,000 Ohms@25˚C
VSM 422 TANK SENDER GASOLINE TANK LEVEL • Accurate - used with the Vessel Systems Monitor VSM 422
can be precisely calibrated for each tank* • Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting
eliminating any mechanical moving parts that can wear and cause
intermittent or complete signal loss • Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks • Ignition protected • Meets American Boat & Yacht Council (ABYC) H-24 requirements for
fuel system components
*Calibrated for use with Vessel Systems Monitor VSM 422 only
ORDER NO.
738-18200
Mfr. No.
1820
ORDER NO.
738-18100
738-18110
Mfr. No.
1810
1811
Measurement Function
Diesel, Water, or Waste Tank Level
Gasoline Tank Level
Max. Tank Depth in. (mm)
32.00 (812.80)
24.00 (609.60)
For more information see: www.bluesea.com
341


































































































   371   372   373   374   375