Page 58 - 2019-2020 CCMarine Catalogue
P. 58

HYDRAULIC OUTBOARD STEERING
®
TOURNAMENT SERIES CYLINDER AND ADJUSTABLE TIE BAR
Extreme heavy duty cylinders and tie bars designed primarily for high performance twin and triple engine applications. Also available for single engine applications. These cylinders and tie bars are application-specific. Please see the chart below.
• Suitable for use with all SeaStar Helms & SeaStar Power Assist • Heavy duty universal cylinder • Bolt-on stainless steel tie bar plates, also reversible (patent pending) • Robust design with heavy duty support brackets, barrel, shaft & seals • Superior corrosion resistance • New pivot plate design provides smooth articulation and a sealed joint (patent pending) • Heavy duty adjustable tie bar (patent pending) • Equipped with stainless steel adjustable o-ring sealed elbow fittings which can be easily
orientated in any direction
TOURNAMENT SERIES APPLICATION GUIDE ALL ENGINE MAKES - 200+ HP
CYLINDER
HARDWARE KIT
TIE BAR
CENTER TO CENTER Distance (in.)
CONFIGURATION
Single Engine
Twin Engine - Single Cylinder (STBD)
Twin Engine - Dual Cylinder
Triple Engine - Dual Cylinder
Quad Engine - Dual Cylinder
Quintuplet Engine (Plus)
Mfr. No.
HC6845S
HC6845
HC6845
HC6845
HC6845
Qty.
Mfr. No.
Qty.
1
1
1
1
Mfr. No.	Qty.
CENTER TO CENTER Distance (mm)
N/A
635 - 650 653 - 777 780 - 991
635 - 673 676 - 744 747 - 869 871 - 1092
635 - 709 711 - 914
TECHNICAL SERVICE
NOTES
See Note 1
See Notes 1, 3, 4, 5, 7
HA6802 Drive Bracket Availability - TBD
See Notes 1, 3, 4, 5
See Notes 1 thru 5
See Notes 1 thru 5
See Notes 1 thru 5
1 Included
1 HA6802
2 HA6804
2 HA6806
2 HA6811
HO6821 HO6822 HO6823
HO6820 HO6821 HO6822 HO6823
HO6822 HO6823
N/A	N/A
25.0 - 25.6 1	25.7 - 30.6 30.7 - 39.0
1
2
25.0 - 26.5 26.6 - 29.3 29.4 - 34.2 34.3 - 43.0
25.0 - 27.9 28.0 - 36.0
CONSULT SeaStar Solutions
CONSULT SeaStar Solutions TECHNICAL SERVICE
GENERAL INSTALLATION NOTES FOR ABOVE CHART
1) Installation may vary according to the following factors: engine mounting height, transom thickness, use of transom savers, tiller bolt hole location, engine tilt range, and engine size.
2) For center engine drops greater than 3 inches (76mm), please consult Seastar Solutions Technical Service. 3) Tie bar length may vary depending on toe in/toe out setup. To allow for toe, add or subtract from your nominal engine center to center distance.
DESCRIPTION
O/B Cylinder Tournament 2, Front Mount
O/B Cylinder Tournament 2, Front Mount c/w Single Engine Hardware Kit
Tie Bar, Adjustable, Tournament 2, Small
Tie Bar, Adjustable, Tournament 2, Medium
Tie Bar, Adjustable, Tournament 2, Large
Tie Bar, Adjustable, Tournament 2, X-Large
Hardware Kit T2, Twin Engine, Single Cylinder w/ Drive Bracket
Hardware Kit T2, Twin Engine, Dual Cylinder w/ FM Plates
Hardware Kit T2, Triple Engine, Dual Cylinder w/ FM Plates
Hardware Kit T2, Quad Engine, Dual Cylinder w/ FM Plates
ORB Tee Fitting Kit
MFR.NO.
HC6845
HC6845S
HO6820
HO6821
HO6822
HO6823
HA6802
HA6804
HA6806
HA6811
HF6005
ORDER NO.
4) Based on recommended engine manufac- turer minimum center to center distances.
036-68450	Deviating from these recommendations may require stroke limiting cylinders
036-68450-S
and/or engine tilt limiting, please consult Seastar Solutions Technical Service.
039-68200	5) Cylinders must be plumbed in parallel only,
no series connections. Only exception is if
cylinders are utilizing a liquid tie bar. 039-68220	6.) Maximum drop: <3 inches (76mm). Con-
039-68210
039-68230
033-68020
033-68040
033-68060
033-68110
037-60050
tact SeaStar Solutions Technical Support for center engine drops greater than 3 inches.
7.) Extra long tiebar kits available, contact SeaStar Solutions Technical Support for details.
Note: Each configuration requires a hardware kit and tie bar kit(s), with the exception of the single engine configuration.
26
For more information see: www.seastarsolutions.com


































































































   56   57   58   59   60