Page 63 - 2019-2020 CCMarine Catalogue
P. 63

HYDRAULIC OUTBOARD STEERING
OUTBOARD STEERING Ordering Guide : SPLASHWELL MOUNT SYSTEMS
ENGINE/CYLINDER CONFIGURATION
SINGLE ENGINE
(SINGLE CYLINDER) Applications up to 300 HP maximum NUMBER OF TURNS: 5.5/6.5
DUAL ENGINE
(SINGLE CYLINDER) Non-Counter-Rotating Applications up to 300 HP maximum. Counter-Rotating Applications up to 600 HP maximum. NUMBER OF TURNS: 5.5/6.5
OPTIONAL EQUIPMENT
COMPONENT DESCRIPTION
Cylinder Helm Hose Kit Oil
QUANTITY REQ’D
1 1 1 3
MODEL
Splashwell Mount SeaStar 1.7 Outboard Hose SeaStar Oil (Qt.)
*SeaStar 1.7 Add a Station Outboard Hose SeaStar Oil (Qt.)
Splashwell Mount Tie Bar Only *SeaStar 1.7 Outboard Hose SeaStar Oil (Qt.)
*SeaStar 1.7 Add a Station Outboard Hose SeaStar Oil (Qt.)
HA 5419
HH 5261-3
MFR.NO.
HC 5380-3 HH 5271-3 HO 51 xx HA 5430
HH 5271-3 HF 6007 HO 51 xx HA 5430
HC 5380-3 HO 5010 HH 5271-3 HO 51xx HA 5430
HH 5271-3 HF 6007 HO 51xx HA 5430
HA 5418 HF 6007 HH 6541-3 PA 1200-2
ORDER NO.
036-53800-3 038-52710-3 039-51 xx 0 033-54300
038-52710-3 037-60070 039-51 xx 0 033-54300
036-53800-3 039-50100 038-52710-3 039-51 xx 0 033-54300
038-52710-3 037-60070 039-51 xx 0 033-54300
033-54180 033-54190 037-60070
038-65410-3 038-52610-3 034-12000
®
For Extra Steering Station Add: Helm	1 Fitting Kit	1 Hose Kit	1 Oil	1
xx = No. of feet required (See Page 39)
Cylinder	1 Tie Bar Kit	1 Helm	1 Hose Kit	1 Oil	3
For Extra Steering Station Add: Helm	1 Fitting Kit	1 Hose Kit	1 Oil	1
xx = No. of feet required (See Page 39) Back Plate Kit (For Standard Helms)
20o Wedge (For Standard Helms) Autopilot Fitting Kit (For All Helms)
*Tilt Helm - SeaStar 1.7 Rear Mount Helm - SeaStar 1.7 Power Assist Steering
NOTES: These recommendations apply to factory stock outboards only. Modified installations may require a higher capacity steering system. If in doubt, contact SeaStar Solutions’ technical service for assistance. (Cylinder volume / helm displacement = number of turns.) The splashwell mount cylinder can be used on all engines complying with ABYC P17/NMMA/BIA standards provided they have a threaded attachment hole (3/8"-24 UNF thread) in the steering arm. The splashwell mount cylinder - Part No. 036-53800-3 is not suitable for use on engines fitted with factory power steering. For dual engines, use SeaStar or engine manufacturer’s tie bar.
For all SeaStar outboard systems: Use following option A or B: A) Outboard hose: order standard lengths (cannot be cut to length.) Part No. 039-51XX0 / # 039-57XX0,
where XX = length in feet. (See Page 39) B) Copper tube: 3/8" diameter copper tube and Hose Kit - Part No. 037-55080.
SINGLE ENGINE CYLINDER CONNECTION TO ENGINE
WARNING: Do NOT use SeaStar PRO HELMS With the unbalanced splashwell cylinder. Doing so may cause steering wheel to lock up leading to possible loss of steering causing property damage and/or personal injury.
ORDER NO. 036-53800-3
SPLASHWELL CYLINDER TYPICAL SINGLE ENGINE MOUNTING
For more information see: www.seastarsolutions.com
31


































































































   61   62   63   64   65