Page 752 - 2019-2020 CCMarine Catalogue
P. 752

VENTS - CLAMSHELL/LOUVERED
PLASTIC LOUVERED VENTS
• ABS plastic, will not rust, discolour or streak. • No dangerous sharp edges to scratch or cut hands or feet. • Designed for gunwale mounting to assure high-vent mounting
so that the boat will meet and pass the tip test. • 3-7/16" wide x 17-7/8" long x 3/4" high (1" neck). • Installation hole size: 2-1/4" x 16-1/8". • Pre-drilled with six mounting holes for size #8 screws. ORDER NO. 101-14950 - Off-White	Mfr. No. 1495-1 ORDER NO. 101-14951 - Chrome Plated	Mfr. No. 1495B1
COLLECTOR BOXES
For use with Venturi, Flush Louvered or Trimline Vents. Corrosion-resistant plastic.
COLLECTOR BOXES
ORDER NO. Mfr. No.	Description	Depth 101-13411 1341-1	For two 3" I.D. hoses	3-7/8" For use with 1494 - 101-14941, 1423, 1424, 1425, 1426, 1496A
101-13421 1342-1	For one 4" I.D. hose	5" For use with 1494 - 101-14941, 1423, 1424, 1496A
COLLECTOR BOXES
Installation Hole 2-1/16" x 15-9/16"
2-1/8" x 15-5/8"
For use with plastic louvered vent, with two 3" I.D. wire-supported ventilation hoses. Box fastens to vent with screws or pop rivets, then vent fastens to the deck. Corrosion-resistant plastic.
ORDER NO. Mfr. No.	Description	Depth	Installation Hole
101-13451 1345-1	For two 3" I.D. hoses	4"	2-7/16" x 16-1/4" For use with 1495 - 101-14950, 101-14951
CLAMSHELL VENTS - STAMPED STAINLESS STEEL
These clamshell vents can be used to seal and splash-proof openings for wire, hose, etc. Also ideal for locker vents.
SMALL CLAMSHELL VENT
• Covers holes up to 1", hose or wire up to 7/16" diameter.
• Requires three #6 fasteners for installation. • 1-9/16" long x 1-3/16" wide x 1/2" high. ORDER NO.106-66399 Mfr. No.66399-1
For more information see: www.attwoodmarine.com
LOUVERED VENT
Measures 14" (356mm) long, 5-3/4" (146 mm) high and 1" (25 mm) deep with 1/2" (13 mm) flush height. Cut-out is 12-1/4" (311 mm) by 3-3/4" (95 mm). ORDER NO. 107-07210 - White
LARGE CLAMSHELL VENT
• Covers holes up to 1-1/2", hose or wire up to 9/16" diameter.
• Requires three #6 fasteners for installation. • 2-1/4" long x 2-3/16" wide x 9/16" high. ORDER NO. 106-66400 Mfr. No.66400-1
For more information see: www.detmarcorp.com
SLOTTED VENTILATOR
Stamped 316 Stainless
ORDER NO.	Mfr. No.	LOUVERS	A	B	C
423-31290	331290-3	5	3-5/8"	12"	4-1/2"
D	E	F
12-7/8"	13/16"	1"
Vent Area
11.65 in2
Fastener
#8 FH
# 6 RH
Fastener
COWL VENT WITH BASE - Stamped 304 Stainless/Plastic
ORDER NO.	Mfr. No.	A	B	C
423-31320	331320-1	5-7/8"	4-7/16"	3-5/16"
CLAM SHELL VENT - Stamped 304 Stainless
D	E	F
2-1/2"	3-9/16"	2-3/4"
Vent Area Fastener
ORDER NO.
423-31335
423-31340
423-31350
Mfr. No.
331335-1
331340-1
331350-1
A	B	C
5"	4-1/2"	2"
7"	5-3/4"	2-1/4"
7-1/2"	6-3/4"	2-7/8"
4.51 in2
7.51 in2
# 6 RH
# 6 RH
# 6 RH
12.02 in2
For more information see: www.sea-dog.com
720


































































































   750   751   752   753   754