Page 818 - 2019-2020 CCMarine Catalogue
P. 818

FLOATING DOCK HARDWARE
FLOATING DOCK HARDWARE
ENGINEERED FOR USE WITH OUR HOWELLTM & DOCKEDGE FLOATS
• All Floating Dock Hardware is 4 Gauge (1/4" nominal) Hot Dipped Galvanized Steel with 9/16” hole punches on 3-1/2" centers except where indicated.
• Slot sizes are 9/16" x 1 5/8" except where indicated. • All Male and Female Connectors have a 3/8" tab with a 7/8" hole to fit a 3/4" Pin or bolt. • Universal hole placement fits 2" x 8" & over lumber. Holes designed for use with any 3-1/2", 4-1/2", or 5-1/2" bolt pattern.
21/2”
51/4”
8”
6”
51/4”
51/4”
51/4”
51/4”
11/2”
7”
3”i.d.
440-99006 Washer Plate.
440-99002 Joist Corner. Use to mount stringers with 440-99006 washer plates. Also use as a backer plate to prevent cleats from pulling out.
57/8”
51/4”
440-75460 Inside Corner. For lighter duty applications where an outside corner is not necessary.
51/4”
51/4”
440-99012 Male T Connector. Use with all styles of Female Connector Hinges.
440-93122 Backer Plate. Used to sandwich wood framing when another piece of hardware isn’t used. Prevents bolt loosening and pull-through.
57/8”
51/4”
440-75470 Inside Anchor Corner. Use as inside corner. Adds extra strength with its anchor chain bar. Accepts chain up to 1/2".
440-99005 Side Pipe Holder. Bolts to side of dock frame to anchor it in place yet allows vertical movement for water variances.
440-99013 Chain Retainer. Holds chain up to 1/2" to secure the dock in position.
10”	10”
51/4”
440-99010 Female Corner Hinge. See Male Corner Hinge.
81/2”
51/4”
440-99001 HD Anchor Chain Corner. Offers maximum corner strength when used with 440-99004 Outside Corner or any Corner Connecting Hinge.
10”
10”
51/4”
10”
10”
51/4”
440-99004 Outside Corner. Use with backer plates or inside corners at outside ends of docks, fingers and swim platforms.
51/4”
440-99011 Female T Connector. See Male T Connector and Connector Pin.
2”
31/4”
3/4” dia.
440-99009 Male Corner Hinge. Use with all styles of Female Connector Hinges.
43/4”	13”
51/4”
12” 440-75160 HD Connector
Hinge. Use at both ends of ramps when connecting dock sections to shore or joining multiple sections.
440-96111 Connector Pin used to join male and female connectors.
For more information see: www.dockedge.com
786


































































































   816   817   818   819   820