Page 901 - 2019-2020 CCMarine Catalogue
P. 901

TOILET ACCESSORIES
NEW CONTOURED BASE
ELECTRIC CONVERSION KIT
Converts Jabsco manual toilet models to full electric operation without altering existing inlet or discharge seacocks. Features: • Also converts most toilets with 4 bolt screw pattern on a 3-3/4” (95mm) diameter
bolt circle such as Groco, Raritan, Wilcox Cirttenden, Mansfield and Sealand. • Push button flushing for ease and simplicity of operation • Kit includes all necessary parts • Flushing pump self-priming up to 4ft (1.2m) vertical lift
• May be installed 3ft (1m) below waterline • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection)
Fitting: 5/8” – 3/4” (16-19mm) ID Inlet Hose, 1” or 1-1/2” (25-38mm) ID Outlet Hose
QUIET FLUSH CONVERSION KIT
Converts virtually any toilet to Quiet Flush quality. Features: • Very quiet flush cycle - like a household toilet • Converts all Jabsco, Par manual toilets and early electric toilets to the new Quiet-Flush System • Also converts Groco HC, HE & HF
ORDER NO
37010-0092
37010-0097
Volt	Fuse DC	Rating
12	25 Amp
24	15 Amp
SPECIAL ORDER ITEM
ORDER NO.
37055-0092*
37055-0094*
37255-0092
37255-0094*
Volt	Fuse
DC	Rating
12	25
24	15
12	25
24	15
Service Kit, Seal & Gasket
• Raritan PH,Cricket, Compact & Crown • Sealand (Mansfield) 750 to 752 series and all Wilcox Crittenden toilets • Single button flush actuator - with dual function water level control switch • Supplied with Par-Max 4 self-priming pump to provide sea water or lake water to rinse the toilet bowl • High capacity waste macerator and bowl
discharge pump • 3-way control panel allows operator to select a
normal flush and drain cycle or to lower or
raise the water level • 37255 Series are supplied with a remote
mounted quiet running flush pump for use with salt, river or lake water. Complete with PumpgardTM strainer.
• 37055 Series are supplied with a solenoid valve and syphon breaker assembly for connection to any existing pressurized pump of 3.5 gpm (13.5 lpm) or more.
Fitting: 3/4” (19mm) ID Inlet Hose, 1” (25mm) ID Outlet Hose. Adapter included for connection to 1-1/2” (38mm) discharge hose.
RUN-DRY MACERATOR PUMP
90197-0000
*Special Order
37055-Series
37255-Series
NEW CONTOURED BASE
The latest version of the Macerator pump now has a fully sealed motor and a new more powerful chopper blade. The sealed motor consists of o-ring sealed endbells, sealed bearings and a hard durable powder coating to prevent corrosion occurring both internally and externally. A new four-bladed chopper has been added to further reduce the possibility of clogging. Features:
The pump still has the Run-Dry feature present in previous models. • Triple-sealed motor to prevent both internal and external motor corrosion • New Four-bladed chopper reduces clogging • Detects the absence of fluid then shuts-off pump before impeller is damaged • Sensor provides adequate run-dry period to allow initial priming of the pump • Interrupting power supply to the macerator resets the Run-Dry Device • Flow rate to 12 gpm (45 lpm) • Self-priming to 4ft (1.2m) vertical lift • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection)
Specifications: Fitting: Inlet Port: 1-1/2" (38mm) Hose Barb plus 1-1/2" NPT Discharge Port: 1" (25mm) Hose Barb Size: 11-3/8" (29cm) long x 4-3/4" (12cm) wide x 3-5/8" (9cm) high Weight: 5 lb (2.3 kg)
For more information see: www.xylem.com
Mfr. No. 18590-2092
ORDER NO. 18590-2092
869


































































































   899   900   901   902   903