Page 920 - 2019-2020 CCMarine Catalogue
P. 920

WASTE TANK MONITORS
TANK MONITORS Fluid level monitoring system for plastic holding tanks.
Solid-state Field-Effect sensing technology by TouchSensor®, offers superior fluid level detection, monitoring, control, and alarm function in recreational marine and RV fluid applications. By comparison, LevelGuardTM Tank Monitoring Systems and Bilge Pump Controls add peace of mind over traditional mechanical alternatives. Keep it safe and dry with LevelGuard!
The LevelGuardTM Tank Monitor provides accurate, early warning for high or low level conditions. With digital certainty, LevelGuard’s tank monitors are a reliable choice for monitoring fluid levels in 1, 2, 3, or 4 tanks. This tank monitoring system is suitable for any applications that carry a water-based solution.
How it Works:
Field-Effect sensors (encased in rugged plastic) create an invisible, low-power electric field that detects fluid levels. When a conductive material, like water, enters the LevelGuardTM “e-field”, the sensors detect its presence and trigger the alarm. Tested to millions of cycles in fluid control applications, LevelGuardTM performs reliably under extreme conditions of temperature, humidity, UV, vibration and salt water corrosion and is a robust solution for challenging environments. Mounted on tank exterior; senses liquid levels on tank interior. Senses through plastic walls, up to 10 mm thick.
Key Features:
• Tanks can be any volume • Clean, flush-mounted display panel is compact
& organized • Touch interface to display tank level readings • Reads on-demand; very low current draw • No mechanical float switches or moving parts
to jam, fail, or wear out • No probes to get clogged or coated • No exposure to corrosion liquid • No tank intrusion required • Sensors attached to exterior of tank with
aggressive adhesive (unaffected by moisture or vibration) • Easy installation • 1 - Year warranty (from date of purchase)
LEVELGUARD 100 TANK MONITOR KIT Kit Includes: LevelGuard Tank Monitor display panel with LED indicator light (12-volt only), LevelGuard Tank Monitor 3-wire sensor with 12" (305mm) wire leads. Fuse holder.
• Single point sensing high or low • Perfect for holding tanks & fresh water systems • Unique bi-directional sensors allow you to use
the same sensor for low or high-level triggering • Can operate off of solar power as it runs on
low-amperage output from solar cells (ideal for
remote fluid level applications) • No damage if wired with reverse polarity • RoHS compliant. Fuse is UL, CSA & TUV rated • Conforms to ISO 9001:2008
LEVELGUARD 300 TANK MONITOR KIT Kit Includes: LevelGuard Tank Monitor display panel with LED’s. Tank Monitor interface module for modular connection to sensors. Wiring harnesses with
4 daisy-chained, adhesive- backed “field-effect” sensors and 15" (4.6 m) wire leads (can be extended by customer). 8-pin CAT-5 Ethernet cable, 20' (6 m). Fuse holder.
• Four sensors per tank with LED display panel that illuminate when sensors detect liquid at each level: Empty, 1/4, 1/2, 3/4, & Full.
• 300 can work with two separate display panels via an additional CAT-5 Ethernet cable (purchase panel & cable separately)
• Caution: Not for use with metal tanks. Can be used with fiberglass tanks if surface is smoothed so sensors have full contact.
• Conforms to ISO 9001:2008
LEVELGUARD 200 TANK MONITOR KIT Kit Includes: LevelGuard Tank Monitor display panel with LED’s & 6" (152mm) colour-coded wire leads. Wiring harness with 3 daisy-chained “field-effect” sensors for 2, or 3 tanks. 12" (305mm) colour-coded wire leads. Fuse holder.
• Three sensors per tank with LED display panel lights that shine progressively when sensors detect liquid at each level: Empty, 1/3, 2/3, & Full
• Can connect to an indicator panel, audio buzzer or relay to remote signalng device
• No damage if wired with reverse polarity • Caution: Not for use with metal tanks.
Can be used with fiberglass tanks if surface is
smoothed so sensors have full contact. • RoHS compliant
LEVELGUARD 400 TANK MONITOR KIT Kit Includes: RV Application LevelGuard Tank Monitor display panel with LED’s. Tank Monitor interface module for modular connection to sensors. Wiring harnesses with 4 daisy-chained, adhesive- backed “field-effect” sensors and 15" (4.6 m) wire leads (can be extended by customer). 8-pin CAT-5 Ethernet cable, 20' (6 m). Fuse holder.
• Display panel includes an adjustable potentiometer to accommodate variation in readings from LPG tanks
• Four sensors per tank with LED display panel that illuminate when sensors detect liquid at each level: Empty, 1/4, 1/2, 3/4, & Full.
• System reads the sensors built into standard RV liquid propane gas (LPG) tanks w/Rochester type electronic gauge or equivalent. Programmed to flash an alert when levels are critical (low for water & LPG, high for holding tanks).
• 400 can work with two separate display panels via an additional CAT-5 Ethernet cable (purchase panel & cable separately)
• Caution: Not for use with metal tanks. Can be used with fiberglass tanks if surface is smoothed so sensors have full contact.
• Conforms to ISO 9001:2008
630-25302
630-16001
630-25303
630-26604
Description
Level 100 Single Tank Monitoring System
Level 200 2-Tank Monitoring System
Level 200 3-Tank Monitoring System
Level 300 3-Tank Monitoring System
Level 400 RV Monitoring System
630-26603
ORDER NO.
630-16001
630-25302
630-25303
630-26603
630-26604
Mfr. No.
Z16001RK
Z25302RK
Z25303RK
Z25303RK
Z26604RK
Voltage
12 to 24 VDC
10.5 to 14.4 VDC
10.5 to 14.4 VDC
10.5 to 14.4 VDC
10.5 to 14.4 VDC
For more information see: www.levelguardproducts.com
888


































































































   918   919   920   921   922