Page 937 - 2019-2020 CCMarine Catalogue
P. 937

FLOAT SWITCHES/PUMP
AUTOMATIC FLOAT SWITCHES
The Automatic Float Switch converts any bilge pump that draws 12 amps (at 12 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24° angle. No large voltage drop which reduces bilge pump output. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume ignition and electrical shock. Contains no mercury, a "Persistent Toxic Substance" listed as a health hazard. CE rated.
Float switch installs independently or directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.
ORDER NO.
104-42010
104-42020
Mfr. No.
4201BL
4202-7
Description
Float switch with cover 12 and 24 Volt
Float switch 12 and 24 Volt
For more information see: www.attwoodmarine.com
AUTOMATIC FLOAT SWITCH
FOR A BETTER AND SAFER LIFE AFLOAT! For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 has a time proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. • Can be mounted to all Johnson Pump submersible bilge pumps
through the clip-on “T-slot” & can be used with 6, 12, 24,
104-42010
104-42020
ELECTRONIC FLOAT SWITCH
The Electronic Float Switch is built on the same concept as the switch on Cartridge Duo. As a separate accessory it is possible to attach the switch to all pumps in Johnson Pump L- Series. • 12 Volt
• Can be mounted to all Johnson Pump submersible bilge pumps • Can be used with 6, 12, 24, or 32 Volt systems • Non clogging switch • No false starts
or 32 Volt systems • Non-clogging switch • No false starts • Saltwater tough • Easy to clean • Pre-wired for manual override • Universal mounting plate • Max Amp: 15 A Mfr. No. 26014 ORDER NO. 847-26014
• Saltwater tough • Easy to clean • Pre-wired for manual override • Universal mounting plate •MaxAmp:15A Mfr. No. 36152 ORDER NO. 847-36152
Mercury Free
Mercury Free
For more information see: www.spxflow.com/en/johnson-pump-marine
GENERAL PURPOSE CENTRIFUGAL PUMPS
The Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy duty construction for use on commercial or pleasure boats. 1-1/2" (38mm) discharge outlet. This pump must be mounted below the waterline. It does not deliver high pressure, nor is it self-priming. It delivers lots of water but at low pressure. 12 volts DC. Non-Automatic.
ORDER NO.
Mfr. No.
Capacity GPH
Volts
Amps
272-00017
17A
3800
12 DC
20.0
Height.
Width
Hose Dia. ID
Panel Switch
Float Switch
5-1/4"
8-1/2"
1-1/2"
272-00049
N/A
For more information see: www.xylem.com
905


































































































   935   936   937   938   939