Page 105 - 2021 Catalog
P. 105

         WILGER SPRAY NOZZLES
*Always verify tips or orifices you received are the size which you require before using with chemical. Chemical rates need to be obtained from your chemical dealer.
  WILGER DR NOZZLE PRICING - 80˚
PART NO. NOZZLE LIST PRICE
40280-06 DR80-06 $18.85
40280-08 DR80-08 $18.85
DR NOZZLES
105 DR NOZZLES - 80˚ & 110˚
 • The DR series is Wilger’s 3rd stage drift reduction series, producing good coverage, with exceptional drift reduction.
• The DR series tip-caps reduce ˜90% of driftable fines, compared with the same application with an ER series tip/cap.
• Ideal for applications which value drift reduction over coverage. Typically coverage is maintained by using higher
application volumes. (i.e. Ground Applied & Systemic Herbicides)
Tip Charts for Pulse Width Modulation (PWM) Spraying of XtendimaxTM Herbicide
    40280-005 DR80-005 $18.85
 40280-007 DR80-0067 $18.85
40280-01 DR80-01 $18.85
40280-015 DR80-015 $18.85
40280-02 DR80-02 $18.85
WILGER DR NOZZLE PRICING - 110˚
PART NO. NOZZLE LIST PRICE
 40286-015 DR110-015 $18.85
40286-02 DR110-02 $18.85
    40286-025 DR110-025 $18.85
  40286-03 DR110-03 $18.85
    40286-04 DR110-04 $18.85
  40280-025 DR80-025 $18.85
40280-03 DR80-03 $18.85
40280-04 DR80-04 $18.85
40280-05 DR80-05 $18.85
40286-05 DR110-05 $18.85
    40286-06 DR110-06 $18.85
  40286-08 DR110-08 $18.85
    40286-10 DR110-10 $18.85
  40286-125 DR110-125 $18.85
      40280-10 DR80-10 $18.85
40286-15 DR110-15 $18.85
  40280-125 DR80-125 $18.85
 40280-15 DR80-15 $18.85
  40280-20 DR80-20 $18.85
  40280-25 DR80-25 $18.85
  40280-30 DR80-30 $18.85
 Important Disclaimer: The tip charts to the right are based on commonly used Pulse Width Modulation (“PWM”) spray systems, and thei nherent pressures drops that occur through the solenoid associated with them. ENSURE your PWM system(s) follow
the same gauge and tip pressure relationships. ALWAYS confirm pressure at spray
tip corresponds with label requirements PRIOR to spraying any chemical. Proper maintenance and observation of system performance to maintain accurate pressures is
recommended.
NOZZLE SIZE
Flow rates based on water (80˚), applied at 20” spacing • Always consult your chemical representative for proper application rates.
     80˚ 110˚
C 20 C 30 C 40 M 50 M 60 M 70
80˚
XC XC XC XC XC XC
110˚
XC XC XC XC XC XC
FLOW PSI RATE GPM
20 0.42 30 0.52 40 0.60 50 0.67 60 0.73 70 0.79
APPLICATION RATE • U.S. GALLONS PER ACRE SPRAYER SPEED • MILES PER HOUR
 VC VC C C C C
C C C C C C
XC VC 20 XC VC 30 VC VC 40 VC C 50 C C 60 C C 70
XC VC 20 XC VC 30 VC VC 40 VC C 50 C C 60 C C 70
XC XC 20 XC XC 30 VC VC 40 VC VC 50 C C 60 C C 70
XC XC 20 XC XC 30 XC VC 40 XC VC 50 XC VC 60 XC VC 70
20 30 40 50 60 70
1.1 1.3 1.5 1.7 1.8 2.0 1.6 1.9 2.2 2.5 2.7 2.9 2.1 2.6 3.0 3.3 3.6 3.9 2.6 3.2 3.7 4.2 4.5 4.9 3.2 3.9 4.5 5.0 5.5 5.9 4.2 5.1 5.9 6.6 7.3 7.9
0.35 21.0 14.0 10.5 8.4 7.0 6.0 5.3 0.43 25.7 17.1 12.9 10.3 8.6 7.3 6.4 0.50 29.7 19.8 14.9 11.9 9.9 8.5 7.4 0.56 33.2 22.1 16.6 13.3 11.1 9.5 8.3 0.61 36.4 24.2 18.2 14.5 12.1 10.4 9.1 0.66 39.3 26.2 19.6 15.7 13.1 11.2 9.8
5
25.2 30.9 35.6 39.8 43.6 47.1
7.5
16.8 20.6 23.8 26.6 29.1 31.4
10.0
12.6 15.4 17.8 19.9 21.8 23.6
12.5
10.1 12.3 14.3 15.9 17.5 18.9
15.0
8.4 10.3 11.9 13.3 14.5 15.7
17.5 20.0
7.2 6.3 8.8 7.7 10.2 8.9 11.4 10.0 12.5 10.9 13.5 11.8 8.4
10.3 11.9 13.3 14.5 15.7 10.5 12.9 14.9 16.6 18.2 19.6 13.1 16.1 18.6 20.8 22.7 24.6 15.8 19.3 22.3 24.9 27.3 29.5 21.0 25.7 29.7 33.2 36.4 39.3
30.0 26.3 36.7 32.2 42.4 37.1 47.4 41.5 52.0 45.5
0.07 0.09 0.10 0.11 0.12 0.13
                      0.11 0.13 0.15 0.17 0.18 0.20
          0.14 0.17 0.20 0.22 0.24 0.26
        0.18 0.22 0.25 0.28 0.31 0.33
         0.21 0.26 0.30 0.34 0.37 0.40
        0.28 0.35 0.40 0.45 0.49 0.53
4.2 5.1 5.9 6.6 7.3 7.9
6.3 7.7 8.9 10.0 10.9 11.8
8.4 10.3 11.9 13.3 14.5 15.7
10.5 12.9 14.9 16.6 18.2 19.6
12.6 15.4 17.8 19.9 21.8 23.6
16.8 20.6 23.8 26.6 29.1 31.4
APPLICATION RATE • U.S. GALLONS PER ACRE
FLOW
PSI RATE SPRAYER SPEED • MILES PER HOUR
 GPM
5 7.5 10.0 12.5 15.0 17.5 20.0
 2.8 3.4 4.0 4.4 4.8 5.2
4.2 5.1 5.9 6.6 7.3 7.9
5.6 6.9 7.9 8.9 9.7 10.5
7.0 8.6 9.9 11.1 12.1 13.1
8.4 10.3 11.9 13.3 14.5 15.7
11.2 13.7 15.8 17.7 19.4 21.0
2.1 2.6 3.0 3.3 3.6 3.9
3.2 3.9 4.5 5.0 5.5 5.9
4.2 5.1 5.9 6.6 7.3 7.9
5.3 6.4 7.4 8.3 9.1 9.8
6.3 7.7 8.9 10.0 10.9 11.8
8.4 10.3 11.9 13.3 14.5 15.7
1.7 2.1 2.4 2.7 2.9 3.1
2.5 3.1 3.6 4.0 4.4 4.7
3.4 4.1 4.8 5.3 5.8 6.3
4.2 5.1 5.9 6.6 7.3 7.9
5.0 6.2 7.1 8.0 8.7 9.4
6.7 8.2 9.5 10.6 11.6 12.6
1.4 1.7 2.0 2.2 2.4 2.6
2.1 2.6 3.0 3.3 3.6 3.9
2.8 3.4 4.0 4.4 4.8 5.2
3.5 4.3 5.0 5.5 6.1 6.5
4.2 5.1 5.9 6.6 7.3 7.9
5.6 6.9 7.9 8.9 9.7 10.5
1.2 1.5 1.7 1.9 2.1 2.2
1.8 2.2 2.5 2.8 3.1 3.4
 2.4 2.9 3.4 3.8 4.2 4.5
3.0 3.7 4.2 4.7 5.2 5.6
3.6 4.4 5.1 5.7 6.2 6.7
4.8 5.9 6.8 7.6 8.3 9.0
NOZZLE SIZE
  DR80-01 40280-01
DR80-06 40280-06
DR110-06 40286-06
 DR80-015 40280-015
DR110-015 40286-015
 DR80-02 40280-02
DR110-02 40286-02
DR80-10 40280-10
DR110-10 40286-10
UC UC UC UC UC UC
UC UC UC UC
XC XC
UC UC UC UC UC UC
UC UC UC UC UC UC
UC UC UC UC UC UC
20 30 40 50 60 70
20 30 40 50 60 70
20 30 40 50 60 70
0.57 0.69 0.80 0.89 0.98 1.06
0.71 0.87 1.00 1.12 1.22 1.32
0.88 1.08 1.25 1.40 1.53 1.65
33.6 41.2 47.5 53.1 58.2 62.9
42.0 51.4 59.4 66.4 72.7 78.6
52.5 64.3 74.3 83.0 90.9 98.2
22.4 27.4 31.7 35.4 38.8 41.9
28.0 34.3 39.6 44.3 48.5 52.4
16.8 20.6 23.8 26.6 29.1 31.4
13.4 16.5 19.0 21.3 23.3 25.1
11.2 13.7 15.8 17.7 19.4 21.0
9.6 11.8 13.6 15.2 16.6 18.0
 DR80-08 40280-08
DR110-08 40286-08
UC UC UC UC UC UC
21.0 25.7 29.7 33.2 36.4 39.3
16.8 20.6 23.8 26.6 29.1 31.4
14.0 17.1 19.8 22.1 24.2 26.2
12.0 14.7 17.0 19.0 20.8 22.5
 35.0 42.9 49.5 55.3 60.6 65.5
26.3 32.2 37.1 41.5 45.5 49.1
21.0 25.7 29.7 33.2 36.4 39.3
17.5 21.4 24.8 27.7 30.3 32.7
15.0 18.4 21.2 23.7 26.0 28.1
  DR80-025 40280-025
DR110-025 40286-025
DR80-12.5 40280-125
DR110-12.5 40286-125
UC UC UC UC UC UC
UC UC UC UC UC UC
20 30 40 50 60 70
1.06 1.30 1.50 1.68 1.84 1.98
63.0 77.2 89.1 99.6 109.1 117.9
42.0 51.4 59.4 66.4 72.7 78.6
31.5 38.6 44.6 49.8 54.6 58.9
25.2 30.9 35.6 9.8 43.6 47.1
21.0 25.7 29.7 33.2 36.4 39.3
18.0 22.0 25.5 28.5 31.2 33.7
  DR80-03 40280-03
DR110-03 40286-03
DR80-15 40280-15
DR110-15 40286-15
UC UC UC UC UC UC
UC UC UC UC UC UC
1.41 1.73 2.00 2.24 2.45 2.65
84.0 102.9 118.8 133.0 145.0 157.0
56.0 68.6 79.2 88.5 97.0 105.0
42.0 51.4 59.4 66.4 72.7 78.6
33.6 41.2 47.5 53.1 58.2 62.9
28.0 34.3 39.6 44.3 48.5 52.4
24.0 29.4 33.9 37.9 41.6 44.9
     DR80-04 40280-04
DR110-04 40286-04
DR80-20 40280-20
DR110-20 40286-20
    XC XC 20 XC XC 30 XC XC 40 XC XC 50 XC XC 60
70.0
52.5 64.3 74.3 83.0 91.0
42.0 51.4 59.4 66.4 72.7
35.0 42.9 49.5 55.3 60.6 65.5
UC UC UC UC UC UC
UC UC UC UC UC UC
20 30 40 50 60 70
 20 1.77 30 2.17 40 2.50 50 2.80 60 3.06 70 3.31
105.0
129.0
149.0 99.0
166.0 111.0
182.0 121.0
196.0 131.0 98.0 78.6
      DR80-05 40280-05
DR110-05 40286-05
DR80-25 40280-25
DR110-25 40286-25
85.7
    XC XC
70
•
56.1
49.1 105
Grimes, IA 800-351-1587 • Gardner, KS 877-829-8502
Brimfield, IL 855-778-8500
        WILGER NOZZLES
   103   104   105   106   107