Page 51 - 2019SalesTrainingManual.pdf
P. 51

Tri-gang verticutter
with 3 independent floating heads
The new TRIPLE V 375 verticutter from Wiedenmann is a tri-gang verticutter that has 3 independent floating heads which enables it to follow the undulations of a fairway. Each head is 25” for a total width of 75”. In addition, the “turnable A-frame” creates a turning pivot point, thus allowing the machine to follow the contours and turns of a fairway.
Working depths up to 1” can be obtained. Depth adjust- ment is quick and easy via 2 cranks on the front rollers. The standard blade is a 2 mm carbide tipped cutting blade at 1.5” spacing. The Triple V 375 can be operated on a tractor as small as 25 HP. Each head is driven with an independent PTO shaft and one heavy duty chain. Operating speeds of 5 to 6 mph can be achieved depending on conditions and depth.
3 fully independent verticutting heads
SPECIFICATIONS
Approximate working width: 75”
Approximate working depth: Down to 1”
Approximate spacing 1-1/2” (standard), 1-1/8” (optional)
Blade thickness: 2 mm carbide tipped Blades counter rotate
Approximate weight: 800 lbs
Tractor size: 30 HP and up 540 PTO
Cat 1; 1,100 lbs. lift capacity
Descriptions and illustrations are not binding. Changes in design and execution are possible.
Further Information:
Wiedenmann North America, LLC 25A Telfair Place Savannah | Georgia 31415 | USA Phone 912-790 3004
info@wiedenmannusa.com www.wiedenmannusa.com


































































































   49   50   51   52   53