Page 52 - 2020 Training Manual

Tri-gang verticutter
with 3 independent oating heads
The new TriPLe V 375 verticutter from Wiedenmann is a tri-gang verticutter that has 3 independent oating heads which enables it to follow the undulations of a fairway. each head is 25” for a total width of 75”. in addition, the “turnable A-frame” creates a turning pivot point, thus allowing the machine to follow the contours and turns of a fairway.
Working depths up to 1” can be obtained. Depth adjust- ment is quick and easy via 2 cranks on the front rollers. The standard blade is a 2 mm carbide tipped cutting blade at 1.5” spacing. The Triple V 375 can be operated on a tractor as small as 25 HP. each head is driven with an independent PTO shaft and one heavy duty chain. Operating speeds of 5 to 6 mph can be achieved depending on conditions and depth.
3 fully independent verticutting heads
SpecIFIcaTIonS
approximate working width: 75”
approximate working depth: Down to 1”
approximate spacing 1-1/2” (standard), 1-1/8” (optional)
Blade thickness: 2 mm carbide tipped Blades counter rotate
approximate weight: 800 lbs
Tractor size: 30 Hp and up 540 pTo
cat 1; 1,100 lbs. lift capacity
Descriptions and illustrations are not binding. changes in design and execution are possible.
Further Information:
Wiedenmann North America, LLC 25A Telfair Place Savannah | Georgia 31415 | USA Phone 912-790 3004
info@wiedenmannusa.com www.wiedenmannusa.com