Page 7 - Ei Electronics Product Selector Guide 2022
P. 7

                                                                                                                                                                                                                                                                                                The Categories
                 Interconnected self contained mains powered, battery backed smoke/ heat alarms located as follows:
1. Throughout the dwelling including all circulation areas that form part of the escape route and
2. All rooms and areas (including attics/lofts/other spaces) in which a fire may start, other than toilets, bathrooms and shower rooms.
Interconnected self contained mains powered, battery backed smoke/ heat alarms located as follows:
1. All circulation areas that form part of an escape route within the dwelling, and
2. All high risk areas / rooms e.g. Heat Alarm kitchen, living rooms, garages and
  LD1
                                                             BEDROOBMED2ROOKMITC2HENKITCHEN
BEDROOM 2 BEDROOKMITC2HENKITCHEN
GARAGEGARAGE
GARAGEGARAGE
DINING DINING ROOM ROOM
DINING DINING ROOM ROOM
                       BATHROOBMATHROOM BATHROOBMATHROOM
LANDINLGANDING HALL HALL LANDINLGANDING HALL HALL
            LIVING LIVING LIVING LIVING BEDROOMBE1DROROMO1M ROOM BEDROOMBE1DROROMO1M ROOM
                                                                                                                                                                                                                    Optical Smoke Alarm Optical Smoke Alarm
Optical Smoke Alarm Optical Smoke Alarm
Multi-Sensor Fire Alarm Multi-Sensor Fire Alarm
Multi-Sensor Fire Alarm Multi-Sensor Fire Alarm
Heat Alarm Heat Alarm
LD2
AT TIC AT TIC
AT TIC AT TIC
                                                                                                                      Alarm Control Switch
Where the Fire Risk Assessment determines that detectors are to be installed in roof voids/attics or other areas difficult to access for testing or monitoring purposes, then all detectors should have remote control functionality to allow Alarm Testing, Alarm Location and Alarm Silence functions to be controlled from one remote control location.
TEST, LOCATE & SILENCE
Heat Alarm
3. All bedrooms
 www.eielectronics.ie
7
See Page 24


































































   5   6   7   8   9