Page 23 - 2018 - 2019 Charltons Brochure

5 Bar Gates
Forester
S STK
Treated softwood
Description:
Wood type: Sizes:
Fittings Posts: Automation:
A value traditional 5 Bar gate with a universal design allowing it to be hung from either end. The Forester benefits from a domed top bar, motice & tenon joints, planed finish and stainless steel fixings.
Pressure treated Softwood (See page 4).
Widths: From 3’ (0.915m) to 12’ (3.66m) held in stock. Height: To top of top rail 3’7” (1.09m)
To top of stile 4’ (1.219m)
Adjustable field gate hinge set, latch and drop bolt/socket set (both gates if hanging as a pair). See page 28 for sizes.
Not suitable for automation.
Gate pairs
Pairs of 5 Bar gates are often hung together across an entrance. Please remember that a drop bolt & socket needs to be fitted to each gate along with a loop over latch.
Please remember timber is a natural product and as such can be subject to movement and weathering as it seasons; absorbing and releasing moisture. It is quite common for small splits (shakes) to occur during drying and also warping when timber dries too rapidly. This is nature at work and should not be considered a fault. This is normally not detrimental and in all but extreme cases will rectify as humidity rises.
Loop over latch x 1
Drop bolt & socket set x 2
www.charltonsgates.com
20