Page 466 - CAT4

TWO JAW PRESSURE-SCREW PULLERS
2 to 20 Ton Capacity
Product Code
87001 87002 87005 87008 87009 87012 87014 87015
Features
Capacity Maximum Reach (Tons) (Inches)
2 2 1/2 2 3 1/2 6 3 10 5 1/2 10 8 3/4
10 15 20 9 1/2 20 14 3/8
Inside Spread (Inches)
3 1/4 3 3/4 3 1/2 7 1/2 8 11 1/2 10 13
Outside Spread (Inches)
3
4 4 1/2 8 1/2 10 13 3/4 12 16
Pressure Screw Size (Inches)
3/8 x 5 1/16 3/8 x 6 1/16 5/8 x 6 7/8 3/4 x 9 13/16 3/4 x 12 1/8 3/4 x 18 15/16 1 x 15
1 x 19
Jaw Thickness (Inches)
3/16 3/16 1/4 1/4 1/4 3/8 7/16 9/16
Jaw Width (Inches)
3/8 3/8 3/4 15/16 15/16 1
1 1/4 1 1/4
• Convertible from external to internal pull - each item makes 2 pullers.
• Self-locking jaws hold puller in place for one-hand operation.
• Interchangeable parts allow tremendous variety of applications.
• Jaws are forged for maximum strength and durability.
2-jaw
• All pullers are easily assembled without the use of other tools.
• Curved anvil heads on the pressure screw allow use of hammer to “shock” frozen gears and pulleys.
• Pullers are compatible with slide hammer sets 87016, 87017, and 87018, simply match the correct pressure screw size.
THREE JAW PRESSURE-SCREW PULLERS
2-1/2 to 12-1/2 Ton Capacity
Product Code
87003 87004 87006 87007 87010 87011 87013
Features
Capacity (Tons)
2 1/2 2 1/2 6 7 1/2 12 1/2 12 1/2 12 1/2
Maximum Reach (Inches)
2 1/2 3 1/2 6 3 5 1/2 8 3/4 15
Inside Spread (Inches)
3 1/4 3 3/4 8 3 1/2 7 1/2 8 11 1/2
Outside Spread (Inches)
3
4 NR 4 1/2 8 1/2 10 13 3/4
Pressure Screw Size (Inches)
3/8 x 5 1/16 3/8 x 6 1/16 5/8 x 6 7/8 5/8 x 6 7/8 3/4 x 9 13/16 3/4 x 12 1/8 3/4 x 18 15/16
Jaw Thickness (Inches)
3/16 3/16 7/32 1/4 1/4 1/4 3/8
Jaw Width (Inches)
3/8 3/8 5/16 3/4 15/16 15/16 1
• NR = Not Recommended, Designed as an inside pull only.
• Convertible from external to internal pull - all except 87006 make 2 pullers.
• Self-locking jaws hold puller in place for one-hand operation.
• Interchangeable parts allow tremendous variety of applications.
• Jaws are forged for maximum strength and durability.
• All pullers are easily assembled without the use of other tools.
• Curved anvil heads on the pressure screw allow use of hammer to “shock” frozen gears and pulleys.
• Pullers are compatible with slide hammer sets 87016, 87017, and 87018, simply match the correct pressure screw size.
3-jaw
466
PULLERS PULLERS & INDUSTRIAL HYDRAULICS