Page 3 - Diversey - TASKI CATALOGUE digital 2020 AU

Service and warranty
• Bespokeservicecontractsareavailable.Formore information contact your local Diversey Care office
• Minimumoneyearwarrantyisavailableonallmachines
• Singlediscmachinesandscrubberdriershaveatwo year warranty on parts and labour
Existing contracts/sites
• Adviceonequipment–forbestproductivity, performance and cost in use
• Demonstrationofequipmenttoconfirmbenefitstoyou
• Trainingtoensuresafe,effectiveandproductiveuse
• Assistancewithproblemsolving–backedupby technical and laboratory teams
New contracts and mobilisation
• Workingwithsales/businessdevelopment
• Surveyingsites–surveytoinclude:equipment type/volume/allocation
• Agree roll out procedures/ensure delivery at appropriate day/time
• Arrange/carryouttrainingonequipment–prior to start up if possible
• Support/trainatstartup
• Agree on service level agreement
• Provide contract manuals, contact details and support material
• Custommadefleetmanagementsystemsavailablevia IntelliTrail®
Support material • Taskcards
• Howtousedocumentation
• Productivityguides
• Web based information visit: diversey.com or taski.com
TASKI® swingo® 1255 B
Preparation
12345
Unplug cable of battery charger, wind up and place on machine (holder).
Battery cut-off switch.
Operation
Fill solution tank with clean water.
Use TASKI IntelliDose (the TASKI onboard dilution system) OR dose cleaning product into dosing aid, then rinse it in the clean water in the solution tank.
Mount squeegee:
position pockets of the squeegee exactly under the squeegee holder and push holder down.
6 7 8 9 10
Position tool(s) carefully Turn the machine on. under lifted brush unit.
Lower brush with foot pedal OR press brush button on display.
Start vacuum motor and solution supply (press orange buttons).
Maintenance
Adjust solution flow. (depending on model - with buttons on dashboard or with lever).
11 12 13 14 15
Lower squeegee with Clean the floor. Turn the machine off. squeegee lever.
Drain recovery tank and rinse with fresh water, then drain solution tank.
Remove the floating unit (filter and floater) with a rotation of the yellow filter in anticlockwise direction.
16 17 18 19 20
Clean the floating unit under Clean solution filter and place Remove tools, clean tools and Remove and clean squeegee. running water. pack into machine. allow to air dry.
21 22 23 24
Wipe machine with moist cloth.
Battery cut-off switch. Plug in cable of battery charger.
ATTENTION! Do not use the machine before you have read
and understood the Instructions of use
©2014 Sealed Air Corporation. All Rights Reserved. 27978B MASTER en 11/14
Flip dosing aid.
Store machine with partially open lid (lid rests on dosing aid) for ventilation.
www.sealedair.com
3