Page 216 - 2019BBCat-Cover-Tabs-test-nobleed

210
Diamut CNC Power Edge Z Wheels
These CNC wheels are designed to be a great choice for edge cleaning and stock removal before running other position profile wheels. They can be used on 3 and 4 cm natural stone countertops during fabrication.
These Diamut CNC Power Edge Z Wheels will greatly extend the life cycle of the consecutive profile wheels when used first to knock out the sharp edges.
Dekton-Approved!
Item #
582 583 584 585
Description Price
80mm HYS Seg. Power Edge Wheel, Pos. 1, for 3cm Material 80mm HYS Seg. Power Edge Wheel, Pos. 1, for 4cm Material 80mm Arrow HYS Seg. Power Edge, Pos. 1, for 3cm Material 80mm Arrow HYS Seg. Power Edge, Pos. 1, for 4cm Material
$561.69 $597.37 $581.26 $608.89
Diamut CNC Breaker Bits
•Offered in double and single configuration •Aggressive diamonds for cutting
•120mm diameter
•2-4cm edge removal
It’s aggressive diamonds will speed up the fabrication process, while saving your CNC profile shaping wheels.
Item #
496 497 498 499
Description Price
If you want to greatly extend the life of your stone tools, use the breaker bits on the stone edges first to remove the bulk of material. Doing this first will allow your CNC Stone Profile Wheels from wearing prematurely, as well as preventing the tools from developing the dreaded groove in the middle of the profile wheel.
The Diamut CNC Breaker Bits are being offered in two types, Double Bits and Single Bits. Both types of bits are 120mm in diameter and can be used on 2-3cm material. If you’re working with 4cm edge profiles, the best breaker bit to use is the double breaker bit for 4cm stone.
Diamut CNC 120mm Double Breaker Bit for 4cm Material Diamut CNC 120mm Double Breaker Bit for 2-3cm Material Diamut CNC 120mm Double Breaker Bit for 2cm Material Diamut CNC 120mm Double Breaker Bit for 2-3cm Material
$854.06 $671.05 $341.85 $523.51
Diamut CNC 92mm Double-Sided Stubbing Wheel, 3+3 Hole Pattern
•Large diamond segments for stock removal •True slab leveling
•Heavy duty
•Tool adapters available
Item #
506
Description
Diamut CNC 92mm Double-Sided Stubbing Wheel, 3+3 Hole Pattern
Price
$317.68
Stone countertop fabrication process is complicated enough to worry about an uneven surface that ruins everything post production. The calibration wheel should always be used first to make sure that the thickness of the stone slab is as true as possible and to eliminate any humps or uneven bumps.
Calibrate your slab and prevent ruining your profile wheels!
These wheels are designed to calibrate the stone and to make sure that the thickness of the surface is plain. They can also be used on calibrating a CNC stone table surface, where most of the work is done and where the cutting and edge profiling takes place. These tables need to be periodically replaced with new and the calibration wheels aids in making sure the surface is true before a countertop is fabricated.
Call 800-575-4401
www.braxton-bragg.com
CNC tooliNg
Diamut CNC tooliNg