Page 20 - AirFlo's Installation Guide R80207

CLIP ON DIVIDER
SLOT FOR CLIP
STEP 5
PLACE DIVIDERS ON RACKS USING THE CLIPS ON THE BACK OF THE DIVIDERS.
SEE FIGURE 5.1
WHEN POSSIBLE, USE PIN ON BOTTOM OF DIVIDER TO LOCK ADJACENT DIVIDERS TOGETHER TO PROVIDE MORE STABLITY
SEE FIGURE 5.2 & 5.3
FIGURE 6.1
FIGURE 5.2
TOP RACK
SLIDE RACK
SLIDERACKLENGTH
FIGURE 6.2
UNDERSIDE OF DIVIDER FIGURE 5.3
STEP 6
THE RACKS SHOULD HAVE AT A MINIMUM 1/2 OF THE SLIDE RACK LENGTH ENGAGMENT INTO THE TOP RACK.
SEE FIGURE 6.1 & 6.2
IF NOT YOU SHOULD CONTACT YOUR SALES REPRESENTATIVE TO DETERMINE IF YOU SHOULD USE YOUR CURRENT RACK DIFFERENTLY OR IF THERE IS A NEED TO ORDER A LONGERRACK.
IF YOU HAVE ANY QUESTIONS PLEASE CALL YOUR SALES REPRESENTATIVE OR CUSTOMER SERVICEAT 1-800-999-9399
A Division of Stein Industries, Inc. 7135 Northland Drive North Brooklyn Center, MN 55428-1514 Phone (763) 504-3570
DMF: ---PC00167, PC1410,PC1038 FILE: R20109-1.idw
PROPRIETARYDRAWINGOFCARLSONAIRFLOMERCHANDISINGSYSTEMS CREATEDBY:creed CONFIDENTIALITY NOTICE: This document is confidential and privileged and is intended for the sole use of the addressee. If you DRAWING/PART NUMBER:
REV. DATE: 6/2/2013 SHEET
DATE: 2/27/2009 4OF5 REV:
FIGURE 5.1
PIN
1/2 OF SLIDE RACK
TITLE: INSTALL GUIDE, REAR HANG VERTICAL MERCHANDISING RACK
receive this document in error, you are advised that any disclosure, copying, distribution or the taking of any action in duplicating this document is strictly prohibited and could result in legal action. This product may be covered under one, or more patents.
R20109-1
B