Page 211 - IE.IE Limited - Sealey Tools Catalogue

A
B
C NEW
A 3-in-1Metal,Voltage&StudDetector Model No. AK2018
Combined unit to accurately detect live or dead electricity cables, water or gas pipes and wooden studs or battens with ease. Powered by a 9V battery (supplied) the detector will, with a red and green LED display and an audible signal, show the presence of metal, electricity and wooden studs or battens.
B Moisture Meter with LED Display Model No. AK2020
Designed to indicate the moisture content of timber in the range 8 to 22%. Colour-coded ranges for readings taken on plaster or brick.
F Non-Contact Voltage Detector Model No. AK1998
Non-contact voltage detector with LED/audible indication. Designed for quickly identifying wire and cable breaks as well as detecting voltage in fuses, cables, switches, outlets and lighting fixtures. Features two selectable voltage settings, low voltage ranges from 80V and high voltage from 220V. Ideal for microwave applications and phase detection in sockets. Requires 2 x AAA batteries (not included).
Testers & Staplers
C Heavy-Duty Staple & Brad Nail Gun Model No. AK7065
Heavy-duty all steel construction staple and nail gun. Features normal and maximum impact control to match material density. Minimum recoil and magazine style loading make this unit easy-to-use. Features safety lock to prevent accidental operation and safety stop to reduce pinch point risk whilst in use. Supplied with box of 100 assorted staples.
211
F
D
E
Application/Fixing Sizes:
Staple Size:
Brad Nail Size:
Replacement Staples (Packs of 500): (6mm), AK7061/9 (8mm), AK7061/2 (10mm) Replacement Nails (Pack of 500):
D - E
Model No. SEE BELOW
6, 8, 10mm 14, 16mm AK7061/8
Mains Testers VDE Approved
VDE Approved mains voltage tester with screwdriver blade and pocket clip. Fully insulated with moulded transparent plastic handle and blade sheath.
DE
Model No: AK1990 AK1991 Testing Range: 100-250V 100-250V Length: 140mm 190mm
H Staple & Nail Gun Model No. AK7061
3-in-1 Staple and nail gun. Fitted with adjustable power control and staple remover. Features removable sole plate for easy clearance of blockages. Supplied with starter pack of nails and staples. Suitable for a wide range of applications. Supplied in storage case.
Display:
Voltage Range:
Frequency Range:
Overvoltage Category:
Operating Temperature: 0°C to +40°C at RH <80%
AK7061/7 (14mm)
Heavy-Duty Staple Remover
Dimensions:
H
26 x 22 x 160mm
Green LED 80-1000V 50-60Hz CATIII
H
G
G
Model No. AK707
Easily removes heavy-duty staples. Large footprint minimises the risk of surface damage. Ergonomic handle.
I Staples, Hoops & Nails for AK7061 Model No. SEE BELOW Not Illustrated
A selection of replacement staples, hoops and nails for Model No. AK7061 and other popular brands.
Crown Size: Application/Fixing Sizes: Staples:
Hoop Staples:
Nails:
9.5mm
4, 6, 8, 10, 12, 14mm 10, 12mm 10, 12, 14mm
Staples
Model No: AK7061/8 AK7061/9 AK7061/2 AK7061/3 AK7061/4 AK7061/1 AK7061/5 AK7061/7 AK7061/6
Hoops
Type/Size:
Staples/6mm
Staples/8mm Staples/10mm Staples/12mm Staples/14mm
Nails/10mm Nails/12mm Nails/14mm
Hoops/12mm
Nails
Pack Qty:
500 500 500 500 500 500 500 500 500
H
For our NEW range of Consumables, see pages 1028 to 1104