Page 216 - IE.IE Limited - Sealey Tools Catalogue

216
Jacking Accessories
A-C Rubber Safety Jack Pads Model No. SEE BELOW
Range of jack pads for various Sealey jacks. Designed to prevent damage to the underside of the vehicle’s jacking point.
ABC
Model No: 2500LE/JP 3000CXD/JP SSP223 Application: 2500LE 3000CXD 2000LEQ, 3003CXQ, 3200CXQP
D EVA Jack Handle Sleeve 400 x Ø30mm ID Model No. 3000CXDHS
Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.
Size (L x ØID): 400 x 30mm Applications: 1250CX, 1500HQ, 2000HQ, 2000LEQ, 2200HL, 2500LE, 2800HL, 3000CXD, 3000LQ, 3001LE, 3003CXQ, 3010CX, 3012CXD, 3030CXD, 3075LE, 3200CXQP, 5000LQ, 10000LQ, RJA1250, RJAS2500
A
B
C
D
EG
F
E Hydraulic Jack Oil Model No. HJO500MLS
Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.
N.B. Never use brake fluid to top up a hydraulic unit.
F Hydraulic Jack Oil 12pc Model No. HJO/500ML
Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.
N.B. Never use brake fluid to top up a hydraulic unit.
G Hydraulic Jack Oil Model No. HJO5LS
Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.
N.B. Never use brake fluid to top up a hydraulic unit.
H Hydraulic Jack Oil 4pc Model No. HJO/5L
Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.
N.B. Never use brake fluid to top up a hydraulic unit.
Size: 5ltr Pack Qty: 4
2tonne
H
Size: Pack Qty:
I
500ml 1
Size: Pack Qty:
500ml 12
Size: Pack Qty:
5ltr 1
3tonne
I
J
J
Cross Beam Adaptor 2tonne
Model No. X136
Minimum Width: Screw Adjustment: Applications: 3010CX, 3012CXD
Provides extra safety when locating awkward jacking point. Ideal for front wheel drive vehicles. Suitable for jacks with a 31-33mm saddle spigot pin.
Maximum Width:
I
820mm 580mm 75mm 3000CXD, 3003CXQ,
I Cross Beam Adaptor 3tonne 4x4 Model No. X137
Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor* (30mm max spigot pin) and you are ready to lift. Suitable for jacks with a 30mm saddle spigot pin. *Note: Remove any rubber jack pad from the saddle before using to improve safety.
RUBBER & STEEL WHEEL CHOCKS
See our full range of rubber and steel wheel chocks on page 231, suitable for cars through to heavy-duty commercial vehicles.
Minimum Height:
Maximum Height:
Screw Adjustment: Applications:
3003CXQ, 3010CX, 3012CXD
140mm 230mm 90mm 3000CXD, 3000LQ, 3001LE,
WARNING: ALWAYS USE AXLE STANDS
Failure to use axle stands may cause serious injury or death by crushing. See pages 232 to 234.
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk