Page 219 - IE.IE Limited - Sealey Tools Catalogue

A
Trolley Jacks
219
Trolley Jack 2tonne Low Entry Short Chassis
Model No. 1050CXLE
Steel chassis with welded castor supports and one-piece hydraulic unit. Fitted with overload valve, carry handle and finger cover for extra safety. Profiled lifting arm allows low clearance height of just 78mm making this unit suitable for sports and custom cars. Suitable for the hobby user or as an emergency mobile jack. Includes one-piece pumping handle.
B Trolley Jack 2tonne Low Entry Model No. 1020LE
Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 86mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading.
A
Hydraulic Jack Oil
C
C Trolley Jack 2.25tonne High Lift Super Rocket Lift
Model No. 1025HL
Ideal for the garage or serious enthusiast. Suitable for 4x4s, cars or light commercial vehicles which require high ground clearance. Super Rocket Lift feature brings lifting arm into contact with jacking point in minimal strokes. Strong double rolled chassis. Also suitable for loading bodyshop chassis jigs.
E Trolley Jack 3tonne Model No. 1153CXHV
Long chassis, high capacity, portable garage jack for serious hobby or recovery vehicle use. Supplied in Hi-Visibility green for easy location and visual safety. Tough pump bracket and heavy-duty one-piece hydraulic unit with safety overload valve. Supplied with one-piece pumping handle with rubber grip.
ABCDE
Recommended for all makes of trolley and bottle jacks as well as cranes.
Model No: Size: HJO500MLS 500ml HJO/500ML 500ml
HJO5LS 5ltr HJO/5L 5ltr
Pack Qty:
1 12 1 4
E NEW
3tonne
D
3tonne
D
Trolley Jack 3tonne
Model No. 1153CX
Long chassis, high capacity, portable garage jack for serious hobby or recovery vehicle use. Tough pump bracket and heavy-duty one-piece hydraulic unit with safety overload valve. Supplied with one-piece pumping handle with rubber grip.
Model No:
Capacity: 2tonne
1020LE
2tonne 86mm 380mm 125mm 560mm 12.6kg
1025HL
2.25tonne 150mm 535mm 180mm 720mm 21.5kg
1153CX
3tonne 130mm 435mm 165mm 625mm
19kg
1153CXHV
3tonne 130mm 435mm 165mm 625mm
1050CXLE
WARNING: ALWAYS USE AXLE STANDS
Failure to use axle stands may cause serious injury or death by crushing. See pages 232 to 234.
B
C
2tonne
2tonne
2.25tonne
78mm
86mm
Minimum Saddle Height:
Maximum Saddle Height:
Maximum Chassis Height:
Length: 530mm Weight: 10kg
78mm 330mm 130mm
19kg
For our full range of Mechanic’s Seats & Creepers, see pages 250 to 251