Page 312 - IE.IE Limited - Sealey Tools Catalogue

312
Pipe & Metal Benders
AB
A-B Hydraulic Pipe Benders Model No. SEE BELOW
Floor standing pipe benders with fabricated steel chassis and heavy-duty hydraulics with integral pump and reservoir. Fitted with externally mounted return springs. Suitable for bending gas and air pipe from Ø15mm(1/2") up to Ø50mm(2") on Model No. PBS99/10 and Ø75mm(3") on Model No. PBS99/14. Supplied with steel dies to help prevent pipe distortion. Bends up to 180° (3 x 60° bends).
C Metal Bender Bench Mounting Model No. PBB04
Manually operated, bench mounting metal bender. Capable of producing radiused and angled bends in strips up to 50mm wide and radiused bends in round/square stock up to 16mm diameter/side.
Die Diameters: 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2", 3" Bending Capacity (Die): Flat Material; <5/16" x 2", Square or Round Material; <5/8"
Bending Capacity (Angle Attachment): 3/16" Flat Mild Steel; <2" Wide, 1/4" Flat Mild Steel; <1-1/4" Wide
F Metal Bender Floor Mounting Model No. PBF04
Manually operated, floor mounting metal bender. Capable of producing radiused and angled bends in strips up to 50mm wide and radiused bends in round/square stock up to 16mm diameter/side.
Die Diameters: 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2", 3" Bending Capacity (Die): Flat Material; <5/16" x 2", Square or Round Material; <5/8"
Bending Capacity (Angle Attachment): 3/16" Flat Mild Steel; <2" Wide, 1/4" Flat Mild Steel; <1-1/4" Wide
A Model No:
Maximum Load:
Maximum Pipe Ø:
Die Sizes: 15mm(1/2"), 20mm(3/4"), 25mm(1"), 32mm(1-1/4"), 40mm(1-1/2"), 50mm(2")
Weight: 42kg
B Model No:
Maximum Load:
Maximum Pipe Ø:
Die Sizes:
20mm(3/4"), 25mm(1"), 32mm(1-1/4"), 40mm(1-1/2"), 50mm(2"), 63mm(2-1/2"), 75mm(3")
Weight: 62kg
PBS99/10
PBS99/14
12tonne 50mm
16tonne 75mm 15mm(1/2"),
D
E
F
D - E
Model No. SEE BELOW
Tripod mounted pipe benders suitable for bending pipes up to 180° (3 x 60° bends). Compact hydraulics with integral ram. Suitable for bending DIN classified medium and heavy pipe. Two-speed hydraulic pump gives fast positioning of pipe in dies and the power to bend pipe up to 50mm(2") on Model No. PBS90 and 75mm(3") on Model No. PBS91. Both units are supplied with interchangeable pipe dies and are packed in a heavy wooden crate for easy transportation.
Industrial Hydraulic Pipe Benders with Stand
TUBE BENDER LEVER TYPE
For our Lever Type Bender, see page 205.
D Model No:
Maximum Load:
Maximum Pipe Ø:
Die Sizes: 15mm(1/2"), 20mm(3/4"), 25mm(1"), 32mm(1-1/4"), 40mm(1-1/2"), 50mm(2")
E Model No:
Maximum Load:
Maximum Pipe Ø:
Die Sizes: 15mm(1/2"), 20mm(3/4"), 25mm(1"), 32mm(1-1/4"), 40mm(1-1/2"), 50mm(2"), 63mm(2-1/2"),
PBS90
PBS91
9tonne 50mm
15tonne 75mm
C
Height: Weight:
700mm 75mm(3")
53kg Height: 700mm
Weight: 117kg
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk