Page 321 - IE.IE Limited - Sealey Tools Catalogue

Battery & Alternator Testers
321
A Digital Battery Tester 12V Model No. BT2101
Fast and accurate assessment of battery condition, even with the battery partially discharged. No heat, no sparks and no misdiagnosis. Tests battery in accordance with rated output based on SAE, DIN or ENC2 criteria and displays results on LCD screen. Diagnose battery faults on the trade counter, in service reception or workshop with confidence. Rugged construction.
B Digital Battery Tester 6/12V Model No. BT2001
Fast and accurate assessment of battery condition, even with the battery partially discharged. No heat, no sparks and no misdiagnosis. Tests battery in accordance with rated output based on DIN, ENC1, ENC2, IEC, JIS or SAE criteria and displays results on LCD screen. Diagnose battery faults on the trade counter, in service reception or workshop with confidence. Rugged construction with protective cover.
Rated Battery Voltage: 6/12V
C Digital Battery & Alternator Tester 6/12/24V
Model No. BT2002
Professional diagnosis of battery and alternator faults. Test battery condition with as little as 1V of residual charge. No heat, no sparks and no misdiagnosis. Checks condition of starter - no complicated connections or interpretation required. Analyse the vehicle’s charging system at rest and under load to determine condition of alternator. Connect and follow the prompts on the LCD screen for straightforward answers. Incorporates simple voltmeter for voltage tests and additional system diagnostics. Rugged construction with protective cover.
Rated Battery Voltage:
Rating Systems:
Test Range: 200-1200 CCA* (SAE), 9-15V Minimum Power Requirement: 9V
*CCA - Cold Cranking Amps
12V SAE, DIN, ENC2
Rating Systems: Test Range:
DIN, ENC1, ENC2, IEC, JIS, SAE 40-2100 CCA* EN 40-2000 CCA* SAE 30-1500 CCA* IEC 25-1300 CCA* DIN 1V *CCA - Cold Cranking Amps
Rated Battery Voltage: Charging System Capability: Rating Systems:
Test Range:
Minimum Power Requirement:
6/12V 6/12/24V** SAE, DIN, EN, IEC 40-2100 CCA* EN 40-2000 CCA* SAE 30-1500 CCA* IEC 25-1300 CCA* DIN 1V *CCA - Cold Cranking Amps** 24V Alternator Test only
D
12V
E
NEW
F
NEW
D Digital Battery & Alternator Tester with Printer 12V
Model No. BT2012
Fast and accurate diagnosis of battery and alternator faults with facility to print the results. Large LCD display shows charging and starting system status and returns decision making information in seconds. Results need no interpretation and the tester will work on batteries with as little as 1.5V of residual charge.
E CombinedBatterySupportUnit& Charger 100A
Model No. BSCU100
See pages 330 to 338 for our full range of Battery Chargers.
2
F Intelligent Speed Charge Battery Chargers
Model No. SPI10S
Fully automatic microprocessor controlled dual voltage battery chargers and maintainers, featuring patented Speed Charge technology. These models can charge the battery up to 3 times faster than conventional battery chargers without damaging the battery. Heavy-duty sturdy case with no-nonsense controls. LED status indicators. Battery presets include conventional calcium, AGM/GEL, leisure and stop/start batteries. Fully automatic float mode ensures the battery is kept fully charged, maintained and ready to use. See page 333 for full details.
G BatteryFluidFiller Model No. JBF1
Battery top-up jug with push release spout to minimise spillage.
Capacity: 2ltr
Minimum Power Requirement:
12V
100A
5-1000Ah
G
12V DIN, EN, IEC, SAE 50-1400 CCA* 50-800 CCA* DIN 50-1400 CCA* EN 50-800 CCA* IEC 50-1400 CCA* SAE By Battery Type JIS 1.5-17V Replacement Printer Rolls: BT2003.V2-01 (Pack of 2) Battery: 1 x 9V (not supplied) *CCA - Cold Cranking Amps
Rated Battery Voltage: Rating Systems:
Test Ranges:
Voltage Range:
For our full range of Battery Tools, see page 472
ltr
B
C
A
6V 12V 24V
6V 12V
12V