Page 332 - IE.IE Limited - Sealey Tools Catalogue

332
Battery Chargers
ABD
C
8A
12V
2A
12V
4A
12V
4A
6V/12V
A-D CompactAutoMaintenanceChargers Model No. SEE RIGHT
Fully automatic multi-cycle switch mode chargers and maintainers designed for charging a variety of batteries: SLA, WET, AGM/GEL and VRLA. The LED display indicates charging or maintenance phase. Chargers will recover slightly sulphated batteries and may rescue drained batteries. Supplied with multi-fit charger cables featuring crocodile clips, vehicle accessory socket plug and hard-wired terminals, incorporating a water tight plug and socket for permanent installation, great for motorcycles and cars.
ABCD
Model No: SMC01 Type: 3-Cycle 12V Supply: 230V Output: 12V Input Current: 0.32A Efficiency: >80%
SMC02
9-Cycle 12V 230V 12V 0.45A >80% 4A <1Ah/month -20°C-+50°C 233 x 28 x 46.5mm IP44 0.5kg
SMC03
9-Cycle 6/12V 230V 6/12V 0.45A >80% 4A <1Ah/month -20°C-+50°C 233 x 82 x 46.5mm IP44 0.5kg
SMC04
9-Cycle 12V 230V 12V 0.6A >80% 8A <1Ah/month -20°C-+50°C 210 x 94 x 58mm IP44 1.1kg
Charging Current:
Back Current Drain:
Ambient Temperature:
Dimensions (L x W x H):
Housing Protection:
Weight: 0.4kg
2A <1Ah/month -20°C-+50°C 198 x 82 x 40.5mm IP44
E
12V/24V 25A/12.5A
NEW
F
5-1000Ah
12V
100A
E Battery Support Unit & Charger 12V-25A 24V-12.5A Model No. BSCU25
High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Charge cycle has 9 profiles designed to optimise the condition of the battery and the speed of the charge. It will recover a discharged battery (>2V) to almost 100% of its original capacity. Designed for use with lead acid and lead calcium batteries including WET, AGM/GEL and VRLA types on 12V and 24V systems. Temperature sensor allows accurate charging of battery, even when cold. Safety circuitry prevents sparks or polarity reversal. Once fully charged, battery may be left connected to be automatically conditioned and maintained.
F Battery Support Unit & Charger 12V-100A Model No. BSCU100
Type:
Supply: Output:
Output Charge: Battery Range:
9-Cycle with Support 230V 12V/24V 12V - 25A, 24V - 12.5A 12V - 75-500Ah, 24V - 45-250Ah
Type:
Supply: Output:
Output Charge: Battery Range:
Microprocessor Controlled 230V 12V 1-100A 5-1000Ah
Professional Battery Support Unit designed for prolonged use during vehicle software updates. This high frequency power supply provides up to 100A stabilized clean power during electronic diagnostic checks, it also utilises a micro processing CPU controller when charging a battery. Designed for use with 12V lead-acid batteries including WET, GEL and AGM types. Includes a function to recharge a deeply discharged battery. Safety circuitry which includes reverse polarity protection, short circuit protection, overload protection and the detection of voltage errors. Once fully charged, the battery can stay connected and will be automatically conditioned/maintained.
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk