Page 341 - IE.IE Limited - Sealey Tools Catalogue

Motorcycle & Trial Bike Stands
341
A
B
250kg
C NEW
135kg
A
B Quick Lift Stand for Off-Road/Trials Bikes 250kg
Model No. MPS8
Powder-coated pressed steel frame, to ensure strength and durability. Ideal for use with off-road/ trials bikes to easily lift the bike when performing maintenance, services or cleaning. Simple, one foot, step-and-lift mechanism means the bike can be instantly raised in one motion. For added safety, features an ‘over centre’ locking toggle linkage to mechanically lock the lift at full height to prevent accidental lowering, also fitted with hydraulic dampener for controlled descent.
Capacity: 250kg
C
Quick Lift Stand/Moving Dolly 135kg
Minimum Height: Maximum Height:
B
300mm 410mm
Model No. MPSD1
Ideal for use with off-road/trials bikes. Easily lifts
the bike when performing maintenance, services or cleaning. Simple, one foot, step-and-lift mechanism means the bike can be instantly raised in one motion. Fitted with four Ø45mm castors for manoeuvrability when bike is secured. Two tie-down points and a large lifting platform for added stability.
A
Two Arm Centre Stand
Capacity: Minimum Height: Maximum Height:
135kg 240mm 350mm
Model No. MPS2
Lifts and stabilises front or back end of hard and soft tail cruiser style bikes quickly and safely. Features adjustable arm height and soft PVC sheath for protection to underside of bike. Design of stand ensures rim and tyre protection and once bike is supported, allows easy removal of front or rear wheel. Minimum/Maximum Height: 200/275mm
450kg
F
D
E
300kg
D Scissor Stand for Motorcycles 450kg Model No. MC5908
Scissor support stand suitable for use either on a motorcycle lift or on the floor. Fitted with ball bearing rollers for smooth lifting and lowering. Raise with sliding T-bar. Supplied with non-slip platform cover for added load security.
Capacity: 450kg Minimum Height: 85mm Maximum Height: 365mm
E
Scissor Stand for Motorcycles 300kg
Model No. MC5905
Scissor support stand suitable for use either on a
motorcycle lift or on the floor. Supplied with sliding pin carriers and three pairs of support pins. Raise with a 22mm spanner/socket.
Capacity: 300kg
F
Triangle Dirtbike Stand
Low Pin Support Minimum Height: Medium Pin Support Minimum Height: High Pin Support Minimum Height: Maximum Height:
180mm 200mm 220mm 335mm
Model No. MS079
Quick and easy to use. Simply hook into the rear axle.
Suitable for use on bikes that have rear axle inner diameters of 11.5mm, 14.5mm and 18.5mm. To move the bike again, simply un-hook the stand from the axle. Locating Pin Height: 380mm Axle Diameter: Ø11.5, 14.5, 18.5mm
For our full range of Chain & Cable and Maintenance Lubricants, see page 1065
380mm