Page 353 - IE.IE Limited - Sealey Tools Catalogue

Motorcycle Service Tools
353
A
C
B
A Motorcycle Fork Seal Drivers Model No. SEE BELOW
Split design for easy operation on both conventional and USD (inverted) forks for the installation of the seals. Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance. Knurled grip gives positive purchase when in use and limits risk of slip if hands are oily. Limits potential damage to the forks caused by using other installation methods. Model No: Size: MS052 33mm MS053 35-36mm MS054 39mm MS055 41mm MS056 43mm MS057 45mm MS058 46-47mm MS059 48mm MS060 49-50mm MS061 54mm
C ForkSealDriver Model No. MS016
Designed for easy installation of fork seals. Limits potential damage caused by other installation methods to the forks.
Minimum/Maximum Fork Diameter:
B Motorcycle Fork Seal Driver Kit 9pc Model No. MS018
Professional kit to cover most diameters of forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Hardened and tempered carbon steel, finished with zinc plating for corrosion resistance. Heavy knurled grip gives positive purchase when in use and limits risk of slip if hands are oily. Limits potential damage to the forks caused by using other installation methods. Sizes: 35-36, 39, 41, 43, 45, 46-47, 48, 49-50, 54mm
Ø35-55mm
D
E
D Motorcycle Coil Spring Compressor Model No. VS1824
Essential for the assembly and disassembly of suspension units. Suitable for most types of classic and modern motorcycle coil springs. Supplied with four spare plastic spring protectors in metal storage case. Use with ratchet wrench.
E MotorcycleSwingarmLockNutSet6pc Model No. MS050
Four tooth sockets, specially designed to remove castellated lock nuts found on motorcycle swingarms. Also suitable for some engine mounting nuts. Supplied in storage case.
Drive:
Maximum Jaw Opening:
D
3/8"Sq & 17mm Hex 105mm
Inner/Outer Ø(Tooth Width):
24/30mm(4mm) 28/37mm(7mm) 30.5/43mm(5mm) 34/43mm(7mm) 41.5/48.5mm(5.5mm) 40.5/50mm(4mm)
E
www.sealey.co.uk
Log on to our website and visit our Video Centre. This includes product demonstrations, troubleshooting and how-to videos, including how to replace a motorcycle fork seal.
Drive:
19mm Hex 1/2"Sq 1/2"Sq 1/2"Sq 1/2"Sq 1/2"Sq
F
F Motorcycle Swingarm Bearing Tool Model No. MS049
Universal tool works on a variety of motorcycles. Aids the straight installation of the swingarm needle bearings. Supplied with three drivers and three plates. Not suitable for use with impact tools.
Motorcycle Shock Bushing Driver Set 4pc
Model No. MS048
Enables shock bushes to be installed straight and fast.
Suits most bushes/shocks. Supplied in holder.
Sizes: 12.5, 14, 16, 18mm
Driver: #1
#2
#3
Bearing Size:
22 x 28, 22 x 29 21 x 27, 22 x 27 20 x 27
G
For our full range of Mechanic’s Gloves, see page 1025
G