Page 446 - IE.IE Limited - Sealey Tools Catalogue

A
B
NEW
12V
446
Memory Savers & Code Breaker Manual
C
12V
A Battery Support Unit & Charger 12V-25A 24V-12.5A
Model No. BSCU25
High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Charge cycle has 9 profiles designed to optimise the condition of the battery and the speed of the charge. It will recover a discharged battery (>2V) to almost 100% of its original capacity. Designed for use with lead acid and lead calcium batteries including WET, AGM/GEL and VRLA types on 12V and 24V systems. Temperature sensor allows accurate charging of battery, even when cold. Safety circuitry prevents sparks or polarity reversal. Once fully charged, battery may be left connected to be automatically conditioned and maintained.
B Battery Support Unit & Charger 12V-100A
Model No. BSCU100
Professional Battery Support Unit designed for prolonged use during vehicle software updates. This high frequency power supply provides up to 100A stabilized clean power during electronic diagnostic checks, it also utilises a micro processing CPU controller when charging a battery. Designed for use with 12V lead-acid batteries including WET, GEL and AGM types. Includes a function to recharge a deeply discharged battery. Safety circuitry which includes reverse polarity protection, short circuit protection, overload protection and the detection of voltage errors. Once fully charged, the battery can stay connected and will be automatically conditioned/maintained. Type: Microprocessor Controlled Supply: 230V
C Diagnostic Socket Memory Safe EOBD 12V
Model No. VS2071
Used to preserve the memory to on-board electronics whilst vehicle’s own battery is disconnected. Saves valuable time spent re-programming lost codes. Can be connected via the vehicle’s EOBD or vehicle accessory power socket. Unit features an internal 12V 4Amp sealed battery and LEDs provide battery condition and charge indicator. Supplied with mains charger.
Cable Length: Connection:
1.4mtr EOBD/Vehicle Accessory Socket
D
12V
Type:
Supply:
Output: 12V/24V
Output:
Output Charge: Battery Range:
12V 1-100A 5-1000Ah
9-Cycle with Support 230V
Output Charge: Battery Range:
A
12V - 25A, 24V - 12.5A 12V - 75-500Ah, 24V - 45-250Ah
E
12V
F
E Diagnostic Socket Memory Safe EOBD
Model No. VS2072
Polarity protected unit attaches to a 12V slave battery and provides power via the EOBD socket to on-board electronics whilst vehicle’s own battery is disconnected. This device saves valuable time spent re-programming lost codes. Features surge protection and three LEDs to indicate power supply status. Cable Length: 2.5mtr Connection: EOBD
G Code Breaker Manual Model No. CBM
Comprehensive book giving references and definitions for over 2700 EOBD/ISO codes. Provides guidance for many diagnostic procedures and checks, when a fault code has been retrieved. Applicable for a wide range of vehicle makes and models.
Chapters: 1-Understanding Fault Codes & Fault Code Definitions, 2-Sensor, Actuator & Component Checks, 3-Component Locations, 4-EOBD/ISO Fault Codes
D Memory Master - Memory Saver & Battery Tester 12V
Model No. VS207
Ingenious product combines two useful functions. Memory Master attaches to a 12V slave battery and provides power via the vehicle accessory socket to on-board electronics whilst vehicle’s own battery is disconnected. The Memory Master also provides a quick check of the battery’s condition with a digital voltage display. This device saves valuable time spent re-programming lost codes. Supplied with 1.3mtr cable and crocodile clips.
Cable Length: Connection:
1.3mtr Vehicle Accessory Socket
12V
Diagnostic Socket Memory Safe EOBD
Model No. VS2073
Professional low cost tool saves all the vehicle settings to prevent loss and expensive reprogramming not just for radio codes but for immobilisers, traction control, engine management and satellite navigation. Bright, easy-to-read LEDs for at-a-glance confirmation of connection. Can be used with any existing booster packs with a vehicle accessory power socket or even vehicle-to-vehicle.
Cable Length: 1.8mtr
F
Connection:
EOBD
G
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk
12V/24V 25A/12.5A