Page 460 - IE.IE Limited - Sealey Tools Catalogue

460
Diagnostic Tools
ABC
12V
12V
A FuelInjectorTestDevice12V-Petrol Model No. VS211
Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection. Works with engine off and pulse timer may be used with fuel pressure gauge. Powered by vehicle’s 12V battery. Can be used to locate fuel system faults such as:
✔ Clogged or leaking fuel injectors. ✔ Sluggish or sticky fuel injectors. ✔ Wiring harness faults.
✔ Fuel injector driver signal faults.
B Lambda Sensor Tester/Simulator Model No. VS925
Tests Zirconia and Titania lambda sensors and ECU. Suitable for 1, 2, 3 and 4 wire sensors, heated and unheated. LED display shows crossover signal from sensor. Simulates rich or lean mixture signals to check ECU response. Insulation-piercing clip for quick and easy connection plus display to confirm wire identity. Features a low battery indicator and powered by 9V battery (supplied).
C Glow Plug Analyser Model No. VS212
Enables fast diagnosis of glow plug failure or degradation without the need to disassemble the plug from the engine. Suitable for use on any 12V DC vehicle system and connects directly to the vehicle’s battery. Features six LED read-out which indicates glow plug status and also whether battery contains enough charge to power the plugs.
E
F
D
D Coil On Plug Tester Model No. VS5270
Designed to test the COP (Coil On Plug) on modern vehicles. Battery operated, hand-held tester which quickly and easily diagnoses if a COP is producing a suitable spark to the plug. Simply place the pad on the COP while the engine is running. Features sound and visual signal recognition.
Battery: 1 x 3V CR2032 Lithium Battery (supplied)
E Digital Tachometer Contact/Non-Contact Model No. TA050
F In-Line Ignition/HT Spark Tester Model No. VS526
Tests HT supply to spark plug. Suitable for all spark ignition engines. Quick and simple fault diagnosis. Probe Length: 55mm Lead Length: 100mm
H
Noid Light Set 6pc
G
HT Tester Set 4pc
Professional quality laser instrument for fast and accurate measurement of rotational speed with or without contact. Will also measure total revolutions, frequency, surface speed and distance. Ten selectable data set memories each with maximum, minimum and average or single value reading, as appropriate. Supplied with reflective tape, for non-contact measurement, and three heads for contact measurement. Powered by 9V battery (supplied) and has jack socket for 6V DC supply. Measures: Range/Units:
H
G
Rotation Speed - Contact:
Rotation Speed - Non-Contact:
Total Revolutions:
Sampling Time:
Accuracy: ± (0.05% + 1 digit) Surface Speed: mtr/min, in/min, ft/min, yd/min Distance: mtr, in, ft, yd Frequency: Hz
Model No. VS213
Check fuel injector signal faults fast. Simply disconnect injector harness and plug in noid light. Turn the ignition on - if the light is steady or absent, then signal from ignition system is at fault. Easy-to-use and fits a wide variety of injector harnesses.
Applications: GM PFI, Ford TBI, GEO TBI, Bosch PFI, GM TBI, GM SCPI
2-20,000rpm 2-99,999rpm 1-99,999 0.5s @ >120rpm
Model No. VS5261
Set allows single or multiple testing. Simply fit tester between spark plug and HT lead and then run engine. Regular flashing of the testers indicates a good HT supply. Not suitable for engines with deeply recessed plugs.
Battery:
External Power: 6V DC
PP3
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk