Page 471 - IE.IE Limited - Sealey Tools Catalogue

Battery & Alternator Testers
471
A
6V 12V
B
A Professional Battery Drop Tester 6/12V
Model No. BT91/7
American style drop tester. Load applied by internal switchgear - no sparking! Suitable for 6 and 12V batteries. Applies load across cells and measures output on meter. Accurate indication of battery voltage and faulty or short circuited cell.
B
American style drop tester. Polarity protected cables - impossible to damage unit by misconnection. Load applied by internal switchgear - no sparking! Suitable for 6 and 12V batteries. Applies load across cells and measures output on meter. Accurate indication of battery voltage and faulty or short circuited cell.
C Battery Support Unit & Charger 12V-25A/24V-12.5A
Model No. BSCU25
High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Charge cycle has 9 profiles designed to optimise the condition of the battery and the speed of the charge. It will recover a discharged battery (>2V) to almost 100% of its original capacity. Designed for use with lead acid and lead calcium batteries including WET, AGM/GEL and VRLA types on 12V and 24V systems. Temperature sensor allows accurate charging of battery, even when cold. Safety circuitry prevents sparks or polarity reversal. Once fully charged, battery may be left connected to be automatically conditioned and maintained.
6V
12V
Professional Battery Drop Tester 6/12V Polarity Free
Model No. BT91/7PF
Type:
Input Voltage:
Input Current:
Charging Voltage:
Charging Current 12V System: 25A Charging Current 24V System: 12.5A Battery Support Mode: <300W
12V
9-Cycle with Support 230V 2.4A 12V/24V
E
6V 12V
D
6V
F
12V
D Hand-Held Battery Tester 6/12V Model No. BT91/1
Tests 6 and 12V batteries. Applies load across terminals and reads voltage performance. Fitted with moving coil meter.
G
Clip-On Ammeter 30Amp
E
Hand-Held Battery Tester 6/12V
Model No. BT98/10
Moving coil style meter suitable for testing DC current and direction without breaking circuit. Ø55mm Dial face with spring loaded induction clip.
Scale Range: 0-30A (either direction)
Model No. BT98/11
Moving coil style meter suitable for testing DC current and direction without breaking circuit. Ø55mm Dial face with spring loaded induction clip.
Scale Range: 0-75A (either direction)
Model No. BT91/10
Tests 6 and 12V batteries. Applies load across terminals and reads voltage performance. Also checks charging voltage. Fitted with moving coil meter. Extending post clamps for batteries in confined spaces.
F Battery Drop Tester 12V Model No. BT91/3
Traditionally styled drop tester for all 12V automotive batteries. Applies load across cells and measures output on meter. Accurate indication of battery voltage and faulty or short circuited cell.
F
C
12V/24V
25A/12.5A
G
H
H
Clip-On Ammeter 75Amp
For our Motorcycle Tester, see page 360