Page 474 - IE.IE Limited - Sealey Tools Catalogue

474
Oxygen Sensor Tools
A
B
C
A Oxygen Sensor Socket Set 7pc 3/8" & 1/2"Sq Drive
Model No. SX032
Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. Windows and slots enable sockets to be fitted over wiring harness.
Contents: 3/8"Sq Drive 22mm(7/8") Offset Oxygen Sensor Socket - 30mm, 1/2"Sq Drive (8 Point); 22mm(7/8") Offset Heated Oxygen Sensor Socket - 50mm, 3/8"Sq Drive/1" Wrench 22mm(7/8") Wide Slot Oxygen Sensor Socket - 90mm, 3/8"Sq Drive/1" Wrench 22mm(7/8") Narrow Slot Vacuum Sensor Socket - 80mm, 1/2"Sq Drive 27mm(1-1/16") Injector Socket - 85mm, 1/2"Sq Drive 29mm Oxygen Sensor Socket - 90mm, 3/8"Sq Drive/1-1/8" Wrench 27mm(1-1/16") Oil Sender Unit Socket - 74mm
D Oxygen Sensor Socket 22mm 3/8"Sq Drive
Model No. SX022
Hardened and tempered Chrome Vanadium steel socket with blackened finish. Suitable for heated and unheated oxygen sensors. Cut-out section allows socket to pass over wiring.
Drive: 3/8"Sq Size: 22mm Length: 90mm
J
B Oxygen Sensor & Thread Chaser Set 5pc Model No. SX0320
Suitable for oxygen sensors found on most modern vehicles. Cut-out and slots enable sockets to be fitted over wiring harness. Includes two chasers for cleaning and repairing damaged threads. Supplied in storage case. Sockets: Straight 80mm Deep 3/8"Sq Drive 22mm, Offset 31mm High 3/8"Sq Drive 22mm, Offset 50mm High 1/2"Sq Drive Octagon Drive 22mm
C Oxygen Sensor Thread Repair Kit M18 x 1.5mm
Model No. VS5281
Time and money saving kit for replacing damaged oxygen sensor threads with a new threaded insert. Kit includes installation tool, reamer, two taps and five inserts in storage case.
Insert Thread Size: Tap Sizes: Replacement Inserts:
M18 x 1.5mm M18 x 1.5, M20 x 1.5mm (Pack of 5) VS5281R
Thread Chasers:
M12 x 1.25mm, M18 x 1.5mm
E
F
D
E Extra-Long Oxygen Sensor Socket 22mm 1/2"Sq Drive
Model No. SX0221
Suitable for deep-seated and longer type oxygen sensors found on modern vehicles. Cut-out section enables socket to pass over wiring.
Drive: 1/2"Sq Size: 22mm Length: 150mm
G-H Oxygen Sensor Port Thread Chasers
Model No. SEE BELOW
Suitable for cleaning and repairing damaged threads on the exhaust oxygen sensor port. Use with 19mm/ 3/8"Sq drive or 21mm socket, depending on model.
F Oxygen Sensor Wrench with Flexi-Head 22mm Model No. SX0222
Hardened and tempered Chrome Vanadium steel socket head with polished chrome finish. Flexible joint with offset grip for maximum access. Suitable for heated and unheated oxygen sensors. Cut-out section allows socket to pass over wiring.
Size: 22mm Socket Depth: 30mm
I Kevlar® Hot Sleeves Model No. SEE BELOW
Manufactured to CAT 2 BS EN 388 and BS EN 407 from 100% DuPont Kevlar®. Designed for use in engine bays to prevent cuts to forearms and burns from exhausts and other hot components. Thumb slot design ensures sleeve will stay in position.
Model No: Length: SSP36 355mm SSP37 460mm
H
I
G
Model No: G VS527 H VS528
Drive:
21mm 3/8"Sq/19mm
Thread Size:
M12 x 1.25mm M18 x 1.5mm
J Lambda Sensor Tester/Simulator Model No. VS925
Tests Zirconia and Titania lambda sensors and ECU. Suitable for 1, 2, 3 and 4 wire sensors, heated and unheated. LED display shows crossover signal from sensor. Simulates rich or lean mixture signals to check ECU response. Insulation-piercing clip for quick and easy connection with display to confirm wire identity. Features a low battery indicator and powered by 9V battery (supplied).
EXHAUST TOOLS
For our complete range of Exhaust Tools, see pages 486 to 488.
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk