Page 479 - IE.IE Limited - Sealey Tools Catalogue

Injector Tools
479
A
A Diesel Injector Puller Set 14pc
B
Model No. VS2059
Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors. Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector. Ball joint allows hammer to be used in confined areas. Contents: Slide Hammer, 1/2"Sq Drive Sockets; 25, 27, 29, 30mm, Tamper-Proof Key, Adaptor (x5) (Bosch, Delphi, Denso, Siemens), Ball Joint
C
B Diesel Injector Master Kit Model No. VS2064
Suitable for the removal of Bosch, Delphi, Denso, Siemens and Pumpe Duse diesel injectors. Set includes keys and deep open profile sockets, used to dismantle injectors, plus a selection of adaptors for attaching the slide hammer securely to the body of the injector. Ball joint and choice of two sizes of slide hammer allow access in confined areas if required.
Contents: Slide Hammers; 1.3kg with 150mm Shaft, 4kg with 400mm Shaft, 4kg Slide Hammer Handle, Flexible Joint, Security Hex Key 10mm, Male Adaptors; 10 x 1.5, 16 x 1.5, 17 x 1, 20 x 1, 25 x 1, 27 x 1mm, Female Adaptors; 14 x 1.5, 27 x 1mm (3pc), Hexagonal Adaptors; 17mm (10 x 1.5 Female), 21mm (14 x 1.5 Female), ‘C’ & ‘J’ Adaptors (Pump Duse), Claw Adaptor, Injector Cap Sockets 1/2"Sq Drive; 25, 27, 29, 30mm
D
NEW
E
Diesel Injector Extractor M8, M12, M14
Model No. VS2045
Slide hammer extractor with thread adaptors to suit Bosch and Lucas diesel injectors fitted to cars and light commercial vehicles. Supplied in storage case.
D Air Hammer Adaptor for Injector Puller
Model No. VS2074
For use with Sealey injector puller slide hammer sets Model No’s VS2059 & VS2064, or a similar tool that has a minimum 350mm shaft length and air hammer. Adaptor allows the air hammer to be used to vibrate the injector loose, instead of using a slide hammer. Ideal for stubborn injectors when an alternative method of removal is required. Supplied in storage case.
C
E Diesel Injector Puller Set Bosch/Delphi
Model No. VS2049
Suitable for the removal of stubborn Bosch/Delphi diesel injectors. Set includes two adaptors for different removal methods. The first screws onto the injector cap and the second locates internally inside the injector allowing extra force to be used. Features a flexible joint allowing the slide hammer to be used in restricted areas. Supplied in carry-case.
Contents: 1.8kg Slide Hammer, Flexible Joint, Adaptors (x2), Security Hex Key 10mm, Injector Cap Socket
Adaptor Thread Sizes: Ø27mm Female x 1mm Pitch
G Vacuum Fuel/Fluid Extractor 8ltr Model No. TP204
8ltr Capacity device constructed from composite materials. Suitable for the extraction of all types of engine, transmission and lubricating oils from vehicles and machinery. Also suitable for the extraction of petrol/diesel and low viscosity fluids such as water. Supplied with 1.5mtr main hose, with interchangeable Ø6.7mm dipstick oil probe and Ø7mm universal fluid probe. Supplied with fuel system adaptor (FSA) for use in conjunction with fuel kit Model No’s VS552, VS553, VS554 and VS555. Can also be used for draining fish tanks, basins and sinks.
Capacity: 8ltr
Adaptors:
M8(M), M12(M), M12(F), M14(F)
Adaptor Shank Size:
.401" Parker Taper
F
G
NEW
8ltr
Oil
Antifreeze
F Injector Cap Removal Socket Set 4pc Model No. VS2060
Removes the top cap and connectors on diesel fuel injectors prior to injector removal. Deep socket and wide cut-out configuration are essential for this application. Fits the most popular injectors found in modern vehicles.
Dipstick Probe: Universal Probe: FSA Pipe:
Ø6.7 x 700mm Ø7 x 400mm 240mm
Applications: Sizes:
Bosch, Delphi, Denso, Siemens 25, 27, 29, 30mm
For our full range of Fuel Priming Tools, see page 426