Page 483 - IE.IE Limited - Sealey Tools Catalogue

Engine Tools
483
A OHV Valve Spring Compressor Model No. VS152
Suitable for most small and medium sized OHV engines. Fully adjustable jaw with 75-165mm capacity and 150mm throat depth. Parallel lift action with automatic lock.
B OHC Valve Spring Compressor Model No. VS153
Suitable for most small and medium sized OHC engines and also for general use on OHV and CVH engines. Universal jaw with 60-155mm capacity and 160mm throat depth. Parallel lift action with automatic lock.
E Valve Collet Remover/Installer Model No. VS1542
For quick removal/installation of valve collets, firmly push or tap tool with a hammer, magnet in tool captures collets. Can be used with cylinder head in-situ or on work bench. Ideal for replacing broken valve springs or valve stem oil seals without removing the head from the engine. For in-situ use, a suitable adaptor (not included) will be required to allow compressed air into the combustion chamber to hold the valve closed while compressing the valve spring.
H Rocker Arm & Valve Compensator Tool Model No. VS151
Suitable for use on Vauxhall/Opel OHC engines. Permits quick, on vehicle, removal of rocker arm and valve play compensator. Mounts on camshaft housing. Cast construction with knurled hex head fixing.
C Multi-Valve Spring Compressor Model No. VS154
Suitable for use on multi-valve petrol and diesel engines with deep-seated valves. Suitable also for general use on OHC, OHV and CVH engines. Universal jaw with 55-175mm capacity and 165mm throat depth. Reversible jaw and adaptor. Twin cam action permits use from above or below valve.
E NEW
F
D
D
OHV Valve Spring Compressor
F OHV Valve Spring Compressor Model No. VS160
Permits valve springs and valve stem oil seals to be replaced without the need to remove the cylinder head when used in conjunction with Model No. VS1601 Compressed Air Adaptor. Reversible jaw adaptor and automatic cam action lock to preset spring tension. Suitable for use on a wide range of OHV, OHC and CVH engines.
Note: Not suitable for engines with deep-seated valves.
Model No. VS168
Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with Model No. VS1601 compressed air adaptor. Adjustable handle, claws and hooks allow use on most OHV engines. Note: Not suitable for vehicles with deep-seated valves.
G Compressed Air Adaptor Model No. VS1601
Use with Model No’s VS160 or VS168 to hold the valves closed whilst spring is compressed. Spark plug adaptor with M14 and M18 threaded fittings for car and light commercial use. Valve assembly maintains cylinder pressure when air supply is cut. Requires a 90-125psi supply. Requires standard bayonet air line coupling (not supplied).
J
J CVHValveSpringCompressor-Ford Model No. VS150
Permits valve stem seal and valve spring replacement without the need to remove the cylinder head. Superior cast design with radiused fulcrum for smooth spring compression. Suitable for CVH Ford engines 1.3, 1.4 and 1.6 as fitted to Escort (inc. XR3i and RS Turbo) and Fiesta (inc. RS Turbo).
I Valve Collet Installer/Remover Model No. VS1651
Spring loaded shaft and clips aid simple and secure installation of valve spring collets. Quick and easy retrieval of lost collets using magnetic tip. Suitable for 8, 16 and 24 valve engines. Ideal for use on heads with recessed valves.
Length: 220mm Valve Configuration: 8/16/24
K Valve Stem Seal Pliers - Long Stem, 16/24v
Model No. VS1671
Steel long stem aids removal and installation of valve stem seals on 16 and 24 valve OHC engines. Serrated tips aid grip. Especially suited to stubborn seals. Type: Straight Head Length: 270mm
I
G
H
K
For our full range of Air Die Grinders, see pages 640 to 642
C
A
B