Page 491 - IE.IE Limited - Sealey Tools Catalogue

Cooling System Tools
C Cooling System Filler Model No. VS0041
Eliminates the introduction of bubbles and air-locks into the cooling system and dramatically reduces system filling time. No more time consuming system bleeding. Reduces fluid waste and messy spills. Automatically conducts system leak test. Low profile design broadens application range especially for use on MPVs where lower windscreen lip might obstruct other tools. Simple operation requires workshop air supply and does not require fiddly interchange of vacuum and fluid hoses - as found on other similar tools. Supplied with 1.3mtr fluid hose.
491
A NEW
B
C
A Combustion Leak Detector Model No. VS0062
Diagnose blown gaskets, cracked blocks and cylinder heads easily and quickly. Checks for CO2 in cooling system and indicates its presence by test fluid colour change. Use with cone adaptor or in conjunction with radiator caps from Model No’s VS001, VS0011, VS0033 and VS006.
B Combustion Leak Detector Model No. VS0061
Diagnose blown gaskets, cracked blocks and cylinder heads easily and quickly. Checks for CO2 in cooling system and indicates its presence by test fluid colour change. Use with cone adaptor or in conjunction with radiator caps from Model No’s VS001, VS0011, VS0033 and VS006.
Fluid Refill:
VS0061F
Combustion Leak Detector Fluid 250ml Model No. VS0061F
Fluid Refill:
B
VS0061F
D
D
Suitable for use with Model No’s VS0061 and VS0062 Combustion Leak Detectors and other leading brands of detector. Fluid changes colour on detection of CO2 gas.
Air Pressure:
Air Consumption: Fluid Hose Length: Air Inlet Size:
C
80-100psi 12cfm 1.3mtr 1/4"BSP
E
F
Cooling System Vacuum Purge & Refill Kit
Model No. VS0042
Dramatically reduces cooling system refill time, without mess and without introducing air-locks. No more time consuming cooling system bleeding and no more messy spills to clean up. Simply plug into the workshop air line, attach to the cooling system header tank and create a vacuum. Complete the process by attaching the filler hose and opening the valve allowing your premixed coolant to flow into the system. Supplied with three adaptors and carry-case.
F
E
Cooling System & Cap Testing Kit
Kit includes cap test adaptors - simply insert bladder into adaptor and inflate.
Model No. VS0031
Capless cooling system tester uses an inflatable bladder to seal the pressure head to the radiator or header tank. Bladder system can be used on both screw and bayonet fittings and seals 90% of cars and light commercial vehicles straight out of the box. Also suitable for motorcycles, off-road and marine applications. Supplied with set of double end adaptors enabling testing of cooling system pressure caps. Supplied in carry-case.
Pressure System Applications: Universal Pressure Cap Test Applications: Standard Bayonet (Ford, GM N Body), External Thread (Jeep, Saab, VW/Audi), Internal Thread (Small Japanese Deep, VW/Audi), Internal Thread (Small Japanese Shallow, Late Model VW/Audi), External Thread (Late Model BMW, Land Rover), External Thread (Late Model Mercedes)
Air Pressure:
Air Consumption: Fluid Hose Length: Air Inlet Size:
90psi 12cfm 900mm 1/4"BSP
For our full range of Drain Pans, see pages 280 to 282