Page 511 - IE.IE Limited - Sealey Tools Catalogue

Clutch Tools
511
B
A
B Dual Mass Flywheel Measuring Tool Model No. VS019
Essential tool designed to test the condition of a Dual Mass Flywheel (DMF). Use with the DMF fitted to the vehicle and with the gearbox/clutch removed. Fitting a new clutch with a faulty DMF may result in early failure of the new clutch. Results must be checked against the vehicle manufacturer’s specification.
A SAC Clutch Alignment Tool Model No. VS011A
Necessary for pre-tensioning self adjusting clutches before removal or installation. Prevents plate distortion which may prevent the clutch from disengaging or cause dragging. Features a refitting tool, allowing the clutch adjuster to be wound back, and six alignment adaptors. Supplied in carry-case.
Clutch Plate Adaptors: 17.9, 18.9, 19.9, 20.9, 21.9, 22.9, 23, 25.9, 27.9, 31.9, 33.9mm
Spigot Adaptors: 13.9, 14.9, 15.9, 16.9, 17.9, 18.9, 19.9, 20.9, 21.9mm
Contents: Slotted Bar, Slotted Bar Adaptors (x6), Angular Torque Gauge, DTI Gauge, DTI Gauge Bracket including Mounting Plate and Retaining Bolt, Ring Gear Locking Tools (x2)
Slotted Bar Adaptor Sizes:
M6 x 1, M7 x 1, M8 x 1.25mm (two of each)
D
See pages 240 to 243 for our full range of Transmission Jacks.
Assembly Flywheel Threads:
300kg
Ø6 x 1, 7 x 1, 8 x 1.25mm
C
NEW
300kg
D
Self Adjusting Clutch Tool
E
NEW
C Under Vehicle Engine/Gearbox Support Model No. VS0110
Designed to support the engine or gearbox when mountings or gearbox are being removed. Ideal when replacing clutches or timing belts. Removes the need for using a transmission jack or engine support beam. Fully adjustable, making the unit suitable for most transverse and in-line configurations. Fitting is by suspending underneath the vehicle by support hooks and counter-balanced against the underside of the vehicle.
Width: 560mm Minimum/Maximum Length: 645/965mm Capacity: 300kg Weight: 10kg
Model No. VS011
High quality die-cast aluminium tool. Suitable for pre-tensioning clutch plate combination prior to re-assembly.
Spigot Adaptors: Ø21/23mm Assembly Flywheel Thread: Ø8 x 1.25mm
E Self Adjusting Clutch Spigot Adaptor Set - BMW
Model No. VS322
Suitable for BMW vehicles with self adjusting clutches. Designed to align the clutch disc before installing the self adjusting type pressure plate. Contains five spigot adaptors and a centring sleeve to cover all popular sizes.
Spigot Adaptors: Ø15/23, 15/26.5, 15/28, 15/32.5, 15/34mm
Centring Sleeve: Ø32.5mm
For our full range of Exhaust Support Stands & Extractors, see page 486