Page 525 - IE.IE Limited - Sealey Tools Catalogue

A Brake Spring Pliers - Commercial Model No. CV252
Designed for the removal/installation of drum shoe retaining springs, found on commercial vehicles. Length: 510mm
D Brake Shoe Spring Pliers Model No. VS035
Purpose made for the installation and removal of drum shoe return springs. Can also be used for removal/ installation of spring from anchor stud. Suitable for most car and light commercial drum brakes.
G Brake Shoe Adjuster Model No. VS0355
Designed for use on hydraulic braking systems. Adjusts the clearance between the brake drum and shoe. May be used to lever the brake shoe to adjust the mechanical adjuster or through slots in the backing plate to turn the star wheel type adjuster. Suitable for cars and light commercials.
Length: 200mm I
B Brake Spring Washer Pliers Model No. VS0362
Designed to aid installation and removal of brake shoe retaining spring washers, found in drum brake assemblies. Spring loaded, offset jaws enable easy access to spring washer located behind wheel hubs. Suitable for cars and light commercial vehicles.
E Double End Brake Spring Washer Tool
Model No. VS036
Designed to aid installation and removal of large and small T-slot anti-rattle washers found in drum brake assembly. Features large viewing cut-away to allow correct alignment of washer. Simple push and twist action.
H Brake Shoe Spring Hook Tool Model No. VS0351
Manufactured from heat treated alloy steel. Specifically designed for installation and removal of drum brake shoe springs.
Length:
C Cylinder Hone Kit 4-in-1 Model No. VS029
Four cylinder-honing tools in one kit, covering 18mm to 89mm cylinder bores. Suitable for honing and de-glazing car brake and clutch cylinders plus motorcycle, outboard and lawnmower engine cylinders. Adjustable honing pressure and flexible drive shaft. Supplied in storage case.
Brake Service Tools
525
D
Leg Configuration: Large Triple: Small Triple: Standard Twin: Stone Sizes:
Bore Sizes:
Ø32-89mm Ø19-68mm Ø18-64mm
3 x 18, 3 x 28, 3 x 50mm
E
F
G
F Cylinder Hone Twin Leg Model No. VS022
Flexible drive shaft and adjustable cutting control. Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from Ø20 to 64mm. Suitable for small brake cylinders.
H
Size:
Replacement Stone Sets: Model No:
VS0221
VS0222
K Cylinder Hone Triple Leg Model No. VS023
Ø20-64mm
Grade:
Medium Fine
K
155mm
I Parking Brake Spring Pliers Model No. VS054
Spring loaded pliers for easy removal of brake shoe arm. Compresses spring, eliminating pinched fingers and frees hand for replacing brake shoe lever.
J
J
Parking Brake Tool - Mercedes
Flexible drive shaft and adjustable cutting control. Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from Ø25 to 64mm. Suitable for small and medium sized brake cylinders.
Size: Ø25-64mm Replacement Stone Sets:
Model No: Grade: VS0221 Medium VS0222 Fine
Model No. VS0352
T-shape design allows easy installation and removal of Mercedes parking brake spring. Suitable for cylindrical and conical shaped springs.
Length: 122mm
For our latest new products & promotions visit www.sealey.co.uk
C
A
B NEW