Page 536 - IE.IE Limited - Sealey Tools Catalogue

536
Tyre Pressure Gauges
A
B
D
C
Tyre Pressure Gauge
with Tyre Tread Depth Gauge Model No. TSTPDG01
Robust gauge with protective rubber bumper reading up to 8bar(120psi). Fitted with 45° angle chuck and pressure release button. Integral colour-coded tyre depth gauge.
D Tyre Pressure Gauge with Clip-On Connector Model No. TST/PG6
Robust gauge with protective rubber bumper and supplied with clip-on connector.
C
F
A-B Digital Pressure Gauges Model No. SEE BELOW
Scale:
0-7bar(0-100psi)
Scale:
Accuracy:
Tyre Depth Range:
0-8bar(0-120psi) ±3% 0-10mm
E
Push-on type tyre pressure gauges with 8mm digit LCD display calibrated in psi. Pressure release valve. Single lithium cell will run approximately 4000 test cycles. Auto power off function with low battery indication. Available as either swivel head rigid Model No. TST/PG98 or flexible leader hose Model No. TST/PG981, both with push-on chuck.
TST/PG98
Digital Tyre Pressure Gauge with Swivel Head & Push-On Chuck TST/PG981 Digital Tyre Pressure Gauge with Leader Hose & Push-On Chuck Scale: 0-100psi Accuracy: ±1% Full Scale Resolution: 0.5psi Operating Temperature: -10°C to 40°C
F TPMS Service Pack Tool Kit Model No. TSTKIT
Complete selection of tools for replacing the service pack on snap-in and clamp-in TPMS sensors which is recommended each time a tyre is changed. Essential tool for making sure the screws, valve core and nut are torqued to the manufacturer’s specifications. Features a grommet tool which is used for the removal/installation from the TPMS stem without damaging the grommet. Supplied with calibration certificate for torque screwdriver.
Drive: 1/4"Sq Screwdriver Minimum Torque: 1Nm Screwdriver Maximum Torque: 9Nm Contents: Torque Screwdriver, Torque Limited Tyre Valve Tool 4lb.in(0.45Nm), Grommet Removal/ Installation Tool, 1/4"Sq Drive Sockets; 11, 12mm, TRX-Star* - T10, T15, T20, Bit Holder
Torque Screwdriver Accuracy: ±1%
A Model No: Description:
B Model No: Description:
Battery: Connector Length:
1 x CR2032 (supplied) Rigid 70mm, Flexible 300mm
E Tyre Pressure Gauge with Tyre Tread Depth Gauge - Flexible Hose
Model No. TSTPDG02
Robust gauge with protective rubber bumper reading up to 8bar(120psi). Fitted with 335mm armoured flexible hose and pressure release button. Integral colour-coded tyre depth gauge.
Scale: 0-8bar(0-120psi) Accuracy: ±3%
TAKE TYRE SAFETY SERIOUSLY!
Check your tyre pressures regularly. An under or over inflated tyre can add to your fuel consumption and cause additional wear. Both are dangerous.
Visit www.tyresafe.org for more tyre safety advice.
Tyre Depth Range:
Tyre Pressure Gauge
0-10mm
G
H
H Twin Connector Professional Dial
I
G 3-Way Professional Dial Tyre Pressure Gauge
Model No. TST/PGX
Robust alloy construction with accuracy of ±1%. Manufactured to EN 837-1/6 and supplied with three air connectors; Straight, 45° and 90°. Rotating bezel ensures accuracy of gauge reading. Professional quality product, suitable for testing regular car tyres as well as water filled tyres.
Scale: 0-4bar(0-57psi)
Model No. TST/PG2
Robust alloy construction with accuracy of ±1%.
Manufactured to EN 837-1/6 and supplied with twin connector and extended handle. Rotating bezel ensures accuracy of gauge reading. Made in Germany. Suitable for testing car and twin wheeled commercial vehicle tyre pressures as well as water filled tyres. Scale: 0-10bar(0-140psi)
I Twin Connector Tyre Pressure Gauge
Model No. TSTPG34
Dial type pressure gauge with twin connector, reading up to 15bar(220psi). Metal body, long reach connector and high range scale. Compatible with both cars and commercial vehicles.
Scale: 0-15bar(0-220psi) Arm Length: 120mm
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk