Page 571 - IE.IE Limited - Sealey Tools Catalogue

A
Door Repair Tools
C - D Urethane Knives Model No. SEE BELOW
Suitable for vehicles with deep dashboards or where bonding is out of reach to normal tools. Also great for two-handed cuts. Extra-long, aluminium construction with vinyl handle. Supplied with blade. Uses standard utility knife blades.
A Suction Gripper Single Head Model No. AK9990
Rubber suction grip prevents damage to surface. Designed for handling glass, tiles, plastic and other non-porous material. Suction vacuum controlled by locking handle.
B Trim & Upholstery Tool Set 5pc Model No. RT/KIT
Tools designed to simplify trim and trim stud removal. Manufactured from resilient plastic to minimise panel damage and marking.
F
Heavy-Duty Door Hinge Pin Tool Set
571
B
C
D
Cup Diameter: Maximum Lift Capacity:
Ø60mm 10kg (Horizontal)
E
Model No: C WK0320
Replacement Blades: D WK0321
Replacement Blades:
Length:
250mm (Pack of 10) AK86/B 450mm (Pack of 10) AK86/B
E Door Hinge Pin Tool Set Model No. VS801
Steel pins and anvil. Suitable for removing doors fitted with hollow type hinge pins. Set includes Ø3.2, Ø4.3 and Ø5.5mm pins and hammer anvil. Replacement pins available.
F
G T-Handled Wire Starter Tool 330mm Stainless Steel
Model No. WK0511
Stainless steel shaft with contoured T-handle for added grip and comfort. Designed for feeding/starting wire through bonding on windscreens.
Length: 330mm
G
Pin Sizes: Replacement Pins: Model No: VS801/01 VS801/02 VS801/03
Size:
Ø3.2, 4.3, 5.5mm
Pack Qty:
2 2 2
Model No. VS803
Steel pins and anvil. Suitable for removing doors fitted with hollow type hinge pins. Cranked anvil affords better access and therefore more power for pin removal. Set includes Ø3, Ø5 and Ø5.5mm pins and hammer anvil. Replacement pins available.
Ø3.2 x 105mm Ø4.3 x 105mm Ø5.5 x 105mm
Pin Sizes: Replacement Pins: Model No: VS803/01 VS803/02 VS803/03 VS803/04
Ø3, 5, 5.5mm
Pack Qty:
2 2 2 2
J
Size:
Ø3 x 110mm Ø5 x 110mm Ø5 x 125mm
Ø5.5 x 110mm
I
H
J Plastic Rivets - Packs of 50 Model No. SEE BELOW
Plastic rivets for Model No’s. RT001 & AK499 and other makes of plastic rivet insertion tools.
H Door Hinge & Handle Removal Kit Model No. VS805
I Plastic Rivet Insertion Tool Model No. RT001
Model No: Pack Quantity: Size:
Model No: Pack Quantity: Size:
Model No: Pack Quantity: Size:
Model No: Pack Quantity: Size:
PR001
50pc Ø6.6 x 17.2mm
PR002
50pc Ø6.3 x 25.2mm
PR003
50pc Ø5 x 15.8mm
PR004
50pc Ø5 x 17.2mm
Tools for the removal of door hinges and handles from Audi, Mercedes, Porsche and VW. Kit consists of two long-reach TRX-Star* drivers and an 8mm hex drive reversible ratchet wrench with two TRX-Star* and three spline bits. Supplied in labelled storage pouch. Contents: 360mm TRX-Star* Driver; T30, 240mm TRX-Star* T-Handle Driver; T20, 8mm Hex Reversible Ratchet Wrench, 8mm Bits; Spline - M4, M8, M10, TRX-Star* - T40, T45
Suitable for applying plastic rivets found mainly in automotive applications. Designed for one handed operation and one-stroke setting. Allows access in hard to reach areas not accessible by conventional lever type tools. Universal nose piece suitable for all sizes of plastic rivets. Supplied with four packs of plastic rivets.
Rivets: Ø5 x 15.8, Ø5 x 17.2, Ø6.3 x 25.2, Ø6.6 x 17.2mm (10 of each)
For our full range of Panel Stands, see pages 694 & 695