Page 582 - IE.IE Limited - Sealey Tools Catalogue

582
Commercial Vehicle Tools
B
12tonne
C
12tonne
A
1.5tonne
A Ball Joint Splitter Hydraulic Light Commercial
Model No. VS3811
Forged steel body, ball joint splitter suitable for light commercial vehicles. Specially designed to be operated manually or by 1.5tonne hydraulic ram (supplied). Features a step down thread adaptor that allows fitting of the manual thrust screw.
B Ball Joint Splitter Hydraulic & Manual - Commercial
Model No. VS3813
Heavy-duty ball joint splitter suitable for commercial vehicles. Specially designed to be operated manually or by 12tonne hydraulic ram (supplied). Features a step down thread adaptor that allows fitting of the manual thrust screw or hydraulic ram. Hydraulic ram interchangeable with Model No. PS990.
C Ball Joint Splitter Hydraulic & Manual 9pc - Commercial
Model No. VS3814
Heavy-duty ball joint splitter with interchangeable jaws. Enables operator to select correct jaw size without taking entire splitter to the vehicle. Use manually or with 12tonne hydraulic ram (supplied).
Jaw Capacity: Small; 30mm, Medium; 34mm, Large; 40mm
Jaw Capacity:
19mm
D
E
Jaw Capacity:
Jaw Opening Capacity:
35mm 100mm
Jaw Opening Capacity: Thrust Screw Lengths: Pivot Rod Length:
95mm 82, 100mm 125mm
F
Ball Joint Splitters - Commercial
F Ball Joint Socket Set 11pc Model No. CV025
G Ball Joint Splitter - Commercial Model No. VS3812
Chemically blackened forged steel body with thrust bolt. Suitable for commercial applications.
Jaw Capacity: 65mm
G
D - E
Model No. SEE BELOW
Chemically blackened forged steel body with thrust bolt. High strength construction, suitable for commercial vehicle ball joints.
Model No:
Chrome Molybdenum, four tooth sockets specially designed to remove castellated lock nut found on ball joints, axles and other applications.
Drive: 1/2"Sq ID/OD (Tooth Width): Ø15/22(3), 18.5/26(3), 21/30(4), 24.5/33(4), 27/37(4), 33.5/44(5), 38/50(5), 44.5/56(5), 50.5/63(6), 55/69(6), 61/75(6)mm
H Ball Joint Splitter - Commercial Model No. CV012
Interchangeable jaws and robust body, designed for the removal of ball joints fitted to commercial vehicles. Drive: 17mm Hex Jaw Size: 24, 32mm
K
Ball Joint Dust Covers - Commercial
H
Jaw Capacity:
D VS3804 E VS3805
33mm 42mm
I
J
I Clutch Alignment Set - Commercial Model No. CV030
Suitable for a wide range of commercial vehicles. Screw action provides fast adjustment to suit hub diameter. Four interchangeable spigot adaptors aid close alignment.
J Clutch Alignment Set - Commercial Model No. CV031
Suitable for a wide range of commercial vehicles. Screw action provides fast adjustment to suit hub diameter. Four interchangeable spigot adaptors aid close alignment.
K
Spigot Adaptors: Mandrel:
Ø20, 25, 27, 30mm Ø36-44, 44-52mm
Spigot Adaptors: Mandrel:
Ø20, 25, 27, 30mm Ø36-45, 42-52mm
Model No. RJC02
Multipurpose ball joint dust covers easily replace split or
damaged dust covers on otherwise serviceable ball joints, avoiding MOT test failure. Pack contains 3 ball joint dust covers supplied with retaining O-rings and fitting tool. Covers a wide range of commercial vehicle applications. Hole Sizes: Ø18mm x 40.5mm
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk