Page 703 - IE.IE Limited - Sealey Tools Catalogue

Trammel Gauge & Chassis Straightener
703
A
A Telescopic Trammel Gauge - Metric Model No. RE50
Aluminium measuring device constructed in four sections. Suitable for obtaining precise dimensional data for chassis alignment purposes. Integral measuring tape provides fast metric read-out between end probes. Mid probe read-out obtained by markings on exterior of pole. Includes three fully adjustable probes.
Minimum Distance - End Probes:
Maximum Distance - End Probes: Minimum Distance - Mid/End Probes: Maximum Distance - Mid/End Probes:
C SuperPull® 10tonne Hydraulic Chassis Straightener - Variable Tilt Model No. DZRE92/C
B Aperture Restraining Bars Model No. DR66
Manufactured with steel tube and heavy jaw assemblies. Designed to triangulate and strengthen door apertures whilst performing pulling operations. Supplied with tommy bar.
1050mm 3000mm 170mm 730mm
C
10tonne
Jaw Width: Minimum Length: Maximum Length:
90mm 830mm 1160mm
D
D Air Hydraulic Pump 10tonne Model No. SEE BELOW
Suitable for use with SuperSnap® hydraulic ram as supplied with Model No. DZRE92/C Body Straightener and all body kits. Supplied with or without air hose.
One of the biggest selling chassis repair systems in the UK with proven performance over the last four decades. Variable position upright allows six preset angles of pull plus a seventh upright position. Supplied as standard with SuperSnap® manual hydraulic pump and ram.
Contains: Chassis Frame, SuperSnap® Hydraulic Pump & Ram, Pull Clamp (x2), Sill Clamp (x2), Chain (x2), Chain Hook (x2), Carriage Anchorage Tube, Tube Stand (x2)
Model No:
RE83/840 RE83/840/CWH
Air Supply Pressure: Oil Pressure:
Specification:
Air Pump only Air Pump with Hose 90-120psi
Oil Capacity:
10000psi 450cc
E
FG
E Crash Check Panel Damage Meter
Model No. CC101
Fast and efficient detection of tell-tale crash and panel damage including thick paint layers, filler and deep rust. Three coloured LEDs indicate condition of paint thickness and presence of filler. Ideal for dealerships and used car operations. Powered by 3V battery (supplied). Not suitable for aluminium or plastic panels.
F Paint Thickness Gauge Model No. TA091
Ideal for the showroom, bodyshop and valeting bay to accurately verify the thickness of paint and check for accident damage. Uses magnetic induction to provide accurate and consistent readings to 0.1mm. Suitable for iron, steel and aluminium with non-magnetic coatings including paint, enamel, plastic and epoxy. Displays measurement in mm or mil. Powered by CR2032 3V battery (supplied).
G Paint Thickness Gauge Model No. TA090
For the professional bodyshop or valeting bay to accurately verify the thickness of paint and check for accident damage. Uses magnetic induction to provide accurate and consistent readings to 0.1μm. Suitable for steel and aluminium panels. Easy to calibrate with test plates and precision standards. USB Interface for downloading data to PC. Powered by two 1.5V batteries (supplied).
TA090 Screen Example.
F
For our full range of Axle Stands, see pages 232 to 235
B