Page 730 - IE.IE Limited - Sealey Tools Catalogue

730
Inverter Welders
B
200A
A
NEW
MIG wire not included.
160A
180A
A MIG Inverter Welders Model No. SEE BELOW
Manufactured with a pressed steel outer casing, these units are lighter than traditional models, with weights of up to only 12.5kg. Inverter welders offer many advantages over the traditional transformer type, giving greater duty cycles and more power factor efficiency. Fan cooled DC power supply, suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys. Thermal overload protection which automatically switches the welder off when it exceeds maximum temperature. Front panel includes dials for voltage output and wire speed with indicator lights for input power and alarm status. Includes 1.8mtr MIG torch, 1.8mtr earth cable, gas hose, industrial regulator and 0.6, 0.8 & 0.9mm contact tips.
IMIG180
30-180A 25% @ 180A 5kg Forced Air CO2, Argon, CO2/Argon Mix 1.8mtr Non-Live 230V 12.5kg
A NEW
MIG wire not included.
B MIG, TIG & MMA Inverter Welder 200Amp Model No. INVMIG200
Manufactured with a pressed steel outer casing, lighter than traditional models at 20kg. Inverter technology offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency. 3-in-1 Welder uses state-of-the-art technology to achieve MIG/TIG/MMA (Arc). Suitable for arc welding a variety of rods including rutile, basic and stainless from Ø1.6mm to Ø4mm. Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys. Switchable between MIG, TIG* or MMA* welding modes (*extra torches required). Thermal overload protection which automatically switches off when it exceeds maximum temperature. Fully functional front panel with self explanatory pictograms for each dial and switch. Wire feed control for adjusting speed of wire fed through the torch during welding. Polarity change terminals allow for MIG or flux-cored welding. Includes 3mtr MIG torch, 3mtr earth cable, gas hose, regulator and 0.6, 0.8(x2), 0.9, 1mm contact tips.
Model No:
Welding Current:
Duty Cycle:
Wire Capacity:
Cooling System:
Gas Type:
Torch:
Supply: 230V Weight: 12.5kg
30-160A 30% @ 160A 5kg Forced Air CO2, Argon, CO2/Argon Mix 1.8mtr Non-Live
Duty Cycle:
MIG:
TIG:
MMA (Arc):
Wire Capacity: Electrode Capacity: Absorbed Power: Supply:
Insulation:
Protection:
Weight:
MIG Torch:
MMA Accessory Kit (Optional): TIG Accessory Kit (Optional): *Included as standard
C
20%@200A, 100%@90A 20%@200A, 100%@90A 20%@170A, 100%@76A
5kg Ø1.6-4mm 6.64kW 230V IP21S F 20kg Euro Non-Live BINZEL® MB15* MMA01 TIG10S
IMIG160
Check you are ordering the right type of inverter welder for your application using the table below.
C
Welding Helmet Auto Darkening
Model No. IMIG160, IMIG180 and INVMIG200 are supplied with a Euro Non-live Binzel MB15 torch.
Shade 5-8/9-13
Model No. PWH620
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk