Page 890 - IE.IE Limited - Sealey Tools Catalogue

890
Beam Clamps & Trolleys
A - D Beam Clamps Model No. SEE TABLE
Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.
Beam Clamp - Dimensions
A
B
B
A
C D
F E
G
H
CD
IMPORTANT SAFETY INFORMATION
Always ensure that the load to be slung does not exceed the rated capacity of the equipment being used. Also ensure that the structure to which the trolley or winch is attached meets or exceeds the safety parameters which are specified by the HSE. Do not allow the load to swing during operation, and do not subject winches, pulleys, beam clamps and straps to shock loads.
ABCD
Model No: BC1000 Capacity: 1000kg Adjustable Beam Width: 75-220mm A: 260mm B: 180-360mm C: 64mm D: 5mm E: 215mm F: 102-155mm G: 25mm H: Ø22mm Weight: 4.5kg
BC2000
2000kg 75-220mm 260mm 180-360mm 74mm 6mm 215mm 102-155mm 25mm Ø22mm 4.95kg
BC3000
3000kg 80-320mm 354mm 235-490mm 103mm 8mm 260mm 140mm 45mm Ø24mm 9.1kg
BC5000
5000kg 80-320mm 354mm 235-490mm 110mm 10mm 260mm 140mm 45mm Ø28mm 10.9kg
E
F
E Pulley Blocks Model No. SEE BELOW
Ideal for moving heavy objects. The wire rope (not supplied) is easily fitted via a hinged section of the side plate. Pulley sheave runs on maintenance-free bushes. Suitable for industrial and automotive applications.
Model No:
PB1000 PB2000
Working Test Wire Rope Capacity: Load: Thickness: 1000kg 1500kg 7mm 2000kg 3000kg 13mm
Plain Block Trolleys - Dimensions
Geared Block Trolleys - Dimensions
ABCABC
F Plain & Geared Block Trolleys Model No. SEE TABLE
Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an ‘I-beam’ or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.
F
Model No: Capacity: Test Load:
PT500 500kg 750kg PT1000 1000kg 1500kg
PT1000G*
PT2000 2000kg 3000kg
PT3000 3000kg 4500kg PT3000G*
* Suffix G on Model No. denotes Geared
Minimum Range: Radius: 64-140mm 800mm 64-140mm 1000mm 76-165mm 1300mm 76-203mm 1500mm
version.
Dimensions (mm):
D E
90 115
104 128 104 128 130 152
145 186 150 200
Weight (kg):
{250 x 13 125 x
Track Width
Adjustable Curve
Min - Max 'I-Beam' Dimensions { (D x W x Web): 7 125 x 75 x 5.5mm
Max. Distance Between Spans:
3000mm 8000mm 2500mm 6000mm 3000mm 9000mm 2700mm 4500mm
A B C
212 115 115
255 127.5 127.5 255 205 135 305 150 150
344 172 172 344 250 180
250 x 20 180 x {350 x 31 200 x 41 850 x
125 x 7.5mm 75 x 5.5mm 125 x 7.5mm 100 x 6mm 150 x 9mm 100 x 7mm 150 x 9mm
17 {
sealey tools
@sealeytools
sealey tools
www.sealey.co.uk
DE
DE