Page 147 - RoadCem Manual - PCT BV

5.7.6 Fatigue
The measurement of fatigue is conducted during the fatigue test with a minimum value of 107 load applications with a strain of 80 􏰀􏰀m/m achieved for a standard axle load of 100 kN.
Figure 5.35 Fatique test.
• When a value for the number of load applications before failure greater than 107 is obtained with a strain of 100 􏰀􏰀m/m at a standard axle load of 100 kN one can consider the reduction of the dose of RoadCem. Verification tests are requiered.
• When a value for the number of load applications before failure small than 107 is obtained with a strain of 100 􏰀􏰀m/m at a standard axle load of 100 kN, more RoadCem has to be used. . Verification tests are requiered.
The sample preparation procedure and the testing methods are given in the appropriate appendices at the end of the manual.
147