Page 102 - 20_SherrillTree_Catalog_NoPrice

100 RIG // LOWERING DEVICES
“I love this thing. Don't waste your time or your rope doing wraps around the tree.”
—HEMLOCK TREE
READ MORE REVIEWS ONLINE
POWMSS Medium- Stainless Steel
POWLSS Large- Stainless Steel
RC-2000
2,205 lbs
9/16"
8 lbs
4,409 lbs
5/8"
13.7 lbs
NOTCH // PORTAWRAP // Stainless Steel
• Consistent feel of manageable friction generated by use of the Port-a- Wrap is just as simple as tree wraps but is much more predictable— with no tree damage
• Quickly wrapped and unwrapped between loads
• Stainless-steel construction
• Tree protecting cap on the tube ends eliminates sheered edges and protects trees
• Medium is for lines up to 9/16"; weighs 3 3/4 lbs
• Large is for lines up to 3/4"; weighs 7 1/4 lbs
• Medium and Large rated at 2,000 lbs WLL
RUST AND CORROSION PROOF ALL STAINLESS STEEL CONSTRUCTION
ITEM #
PRODUCT
STEIN // FLOATING LOWERING DEVICE
Working ropes can easily be wrapped and unwrapped without removing the RC-1000 or RC-2000 from either its main anchor point or the top attachment point.
ITEM #
40069
40070
PRODUCT
RC-1000 (Not shown)
RC-2000
WLL MAX ROPE
WEIGHT
INSTALL AND PRETENSION MID-LINE IN SECONDS
CMI // ROPE JACK
The CMI Rope Jack is a Mechanical Advantage tool for pre-tensioning static lines, light lifting and cabling. The Rope Jack is small enough and light enough to be carried aloft by a climber for Mechanical Advantage within the crown.
• Weighs 5 lbs
• MA is approximately 5:1
• NOT be used for heavy or dynamic loads
• Approved for static ropes from 3/8"-5/8" diameters
• Used to remove slack & stretch for lowering and to lift the tips on light limbs
• The length of the handle limits excessive loading to avoid rope damage
• Can attach mid-line and can run virtually any length of rope
• User can generate somewhere between 300-800 pounds of force
ITEM # PRODUCT
39641 CMI Rope Jack